Please select Into the mobile phone version | Continue to access the computer ver.
ESC Status Error on Phantom 3 Pro after Firmware Update
12Next >
4261 52 2018-3-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
StevenHuff
lvl.2
Flight distance : 333852 ft
Offline

I've suddenly start receiving ESC status error after upgrading my P3 Pro to firmware P3X_FW_V01.11.0020.bin. Prior to the upgrade, everything was working perfectly. Will someone please help me. Thank you
2018-3-28
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

Steven, you can try to update the firmware we provided. See if it works.
2018-3-28
Use props
StevenHuff
lvl.2
Flight distance : 333852 ft
Offline

DJI Thor Posted at 2018-3-28 17:51
Steven, you can try to update the firmware we provided. See if it works.

Thank you!!!  This firmware update solved the problem.  I appreciate your help!!
2018-3-28
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

StevenHuff Posted at 2018-3-28 20:24
Thank you!!!  This firmware update solved the problem.  I appreciate your help!!

Good to hear. Should you have any further questions, please feel free to contact us, we'd glad to help.
2018-3-30
Use props
apc
lvl.1

Cuba
Offline

having the same issue here could you share the .bin file?
2018-12-10
Use props
fansfe479993
lvl.1
Flight distance : 2436270 ft
United States
Offline

I replaced my ESC and replaced one motor and also made sure that the software was up to date also I reinstalled the software a couple times and still have an esc error. I believe that one of the other motors could have a little dirt in it, would that cause an esc error?
2018-12-11
Use props
fans94a8fc8f
lvl.1

Bahamas
Offline

DJI Thor Posted at 2018-3-28 17:51
Steven, you can try to update the firmware we provided. See if it works.

HI. I have a p3 professional and crashed it and damaged the camera. So I put an advanced camera on it   Brand new. And now I have the esc error. Can u help
2019-2-17
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

fans94a8fc8f Posted at 2-17 13:23
HI. I have a p3 professional and crashed it and damaged the camera. So I put an advanced camera on it   Brand new. And now I have the esc error. Can u help

Hi there, may I know if there is only the camera damaged after the crash? And what's the operation before the ECS error shows up? If the ESC error exists after you tried to update the firmware, I will PM you the firmware to try.
If the error shows up after changing the camera or the crash, you may try to update the original Phantom 3 Adv firmware for the drone first and see if this helps.
But as the drone crashed before, I may suggest that you send the drone in for diagnosis for the full performance.
2019-2-17
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

wamuBugMe Posted at 4-24 03:44
Hey DJI Thor, I'm experiencing the same problem. Would you please send me the firmware you talk about?
Greets

Hi wamuBugMe, may I know the specific model of your drone? And can I know the operation before the case happened?
2019-4-24
Use props
djiuser_JZsGxvVfqSyl
lvl.1

Philippines
Offline

Hi dji thor,,i have experience the same problem an esc error status when ill upgrade the firmware to the v 1.11.20...can u please help me to fix my phantom 3 advanced.ty
2019-4-28
Use props
Neville
lvl.1
Flight distance : 675499 ft
Australia
Offline

I upgraded to v1.11.0020 and now I am also getting the ESC error.  Please advise how this can be fixed.
2019-4-29
Use props
Neville
lvl.1
Flight distance : 675499 ft
Australia
Offline

Sorry, its a P3P
2019-4-29
Use props
turbospooky
lvl.1
Denmark
Offline

DJI Thor Posted at 2-17 18:41
Hi there, may I know if there is only the camera damaged after the crash? And what's the operation before the ECS error shows up? If the ESC error exists after you tried to update the firmware, I will PM you the firmware to try.
If the error shows up after changing the camera or the crash, you may try to update the original Phantom 3 Adv firmware for the drone first and see if this helps.
But as the drone crashed before, I may suggest that you send the drone in for diagnosis for the full performance.

Hi Thor

I have the same problem after update  my P3P to 020 firmware. Is there a newer a firmaware you can PM?
2019-5-6
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

turbospooky Posted at 5-6 10:31
Hi Thor

I have the same problem after update  my P3P to 020 firmware. Is there a newer a firmaware you can PM?

Hi there, I had sent you PM, please kindly check.
2019-5-6
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

Neville Posted at 4-29 02:25
I upgraded to v1.11.0020 and now I am also getting the ESC error.  Please advise how this can be fixed.

Hi Neville, sorry for the late reply. I sent you PM about the link of the firmware, please kindly check.
2019-5-6
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

djiuser_JZsGxvVfqSyl Posted at 4-28 15:05
Hi dji thor,,i have experience the same problem an esc error status when ill upgrade the firmware to the v 1.11.20...can u please help me to fix my phantom 3 advanced.ty

Hi there, I am sorry for the delay, PM sent, please kindly check.
2019-5-6
Use props
djiuser_lqwuL5TA9dYd
lvl.2
Flight distance : 49150 ft

Argentina
Offline

I upgraded to 1.11 and now i have the same issue plz send me the file... I have a phantom 3 adv
2019-6-7
Use props
Dante.Pinkman
lvl.2
Flight distance : 49150 ft

Argentina
Offline

DJI Thor Posted at 5-6 19:05
Hi there, I am sorry for the delay, PM sent, please kindly check.


Hi Thor.
I recently upgraded to 1.11 drone and controller and now i have the same issue (ESC Error Message)  plz send me the file... I have a phantom 3 adv.
2019-6-8
Use props
fans478bee35
New
Flight distance : 72805 ft
Indonesia
Offline

Hello..
I have problem with my P3A..after update RC firmware to 1.9.2 version, and then after link RC...my P3A always give me notice everytime i use dji go app to update the firmware on aircraft.

Rc and aircraft can connected but I can't turn on the proper

My aircraft firmware version 1.6.40 ..the problem is..the version firmware on dji.com is lower than mine...firmware version is 1.11.20

Anyone can help me please??
2019-6-9
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

Dante.Pinkman Posted at 6-8 21:47
Hi Thor.
I recently upgraded to 1.11 drone and controller and now i have the same issue (ESC Error Message)  plz send me the file... I have a phantom 3 adv.

Hi Dante, I am sorry for the late reply. I had sent you PM, please kindly check.
2019-6-10
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

fans478bee35 Posted at 6-9 04:03
Hello..
I have problem with my P3A..after update RC firmware to 1.9.2 version, and then after link RC...my P3A always give me notice everytime i use dji go app to update the firmware on aircraft.

Hi there, firmware v1.6.40 is an older firmware, the latest official firmware for Phantom 3 Adv is v1.11.20, please download the latest firmware v1.11.20 from https://www.dji.com/phantom-3-adv/info#downloads and update again.
2019-6-10
Use props
DJI Phantom3Pro
lvl.1
Flight distance : 109570 ft
United States
Offline

I believe I have a firmware issue.  The only indication I have is no image transmission from the camera.  The AC seems to function normally otherwise.  I downloaded the current firmware and with the controller turned off, attempted to "upgrade" the firmware.  I captured the firmware log file on my MAC and is pasted below.  Any suggestions would be most appreciated!

[00012240][01 00] Firmware upgrade finished successfully.
[00012388]Done.

[00012479]Packet [C:\P3X_FW_V01.11.0020.bin] resumed, card sn [0x43428892].
[00012611]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012737]Version checking[2]...
[00013020][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.
[00013181][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00013329][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00013539][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013761][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013879][11 01][00] v1.6.1.0 -> v2.0.0.33
[00014013][12 00][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00014113][12 01][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00014273][12 02][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00014533][12 03][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00014770][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014944][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00015173][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00015339][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015432][01 00][05] v1.32.5432 -> v1.32.5432
[00015485][01 01][00] v1.6.2736 -> v1.32.5432 need upgrade
[00015520][08 00][00] v0.11.0.4 -> v0.13.0.7 need upgrade.
[00015559][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00015586]Done.

[00015617]Firmware upgrading[2]...
[00015749][01 01] Firmware upgrade start...
[00046006][01 01] Firmware upgrade finished successfully.
[00046856][08 00] Firmware upgrade start...
[00012479]========== remo-con disconnect. boot(15) ============
[00012509]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012538]Packet upgrade start...

[00012577]Packet checking...
[00012608]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012670]Done.

[00012697]Version checking[1]...
[00012764][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.
[00012828][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012863][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012964][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013164][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013192][11 01][00] v1.6.1.0 -> v2.0.0.33
[00013298][12 00][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00013378][12 01][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00013452][12 02][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00013517][12 03][00] v1.8.0.0 -> v1.12.0.0 need upgrade.
[00026046][15 00][00] device not detected.
[00026138][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00026254][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00026313][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026354][01 00][00] v1.32.5432 -> v1.32.5432
[00026384][01 01][00] v1.32.5432 -> v1.32.5432
[00038912][08 00][00] device not detected.
[00038973][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00039004]Done.

[00041036]Waiting for user confirm...
[00051066]Timeout, start upgrade automatically.

[00051133]Firmware upgrading[1]...
[00051181][12 00] Firmware upgrade start...
[00114198][12 00] Firmware upgrade finished successfully.
[00114244][12 01] Firmware upgrade start...
[00180002][12 01] Firmware upgrade finished successfully.
[00180047][12 02] Firmware upgrade start...
[00244267][12 02] Firmware upgrade finished successfully.
[00244315][12 03] Firmware upgrade start...
[00012420]========== remo-con disconnect. boot(15) ============
[00012448]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012479]Packet upgrade start...

[00012515]Packet checking...
[00012548]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012615]Done.

[00012647]Version checking[1]...
[00012719][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.
[00012779][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012815][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012935][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013036][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013066][11 01][00] v1.6.1.0 -> v2.0.0.33
[00013149][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013229][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013384][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013464][12 03][00] v1.12.0.0 -> v1.12.0.0
[00025996][15 00][00] device not detected.
[00026090][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00026209][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00026286][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026315][01 00][00] v1.32.5432 -> v1.32.5432
[00026348][01 01][00] v1.32.5432 -> v1.32.5432
[00038877][08 00][00] device not detected.
[00038924][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00038959]Done.

[00040988]Waiting for user confirm...
[00051021]Timeout, start upgrade automatically.

[00051084]Firmware upgrading[1]...
[00051144][17 00] Firmware upgrade start...
[00145086][17 00] Firmware upgrade finished successfully.
[00145125][17 01] Firmware upgrade start...
[00012427]========== remo-con disconnect. boot(15) ============
[00012459]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012490]Packet upgrade start...

[00012527]Packet checking...
[00012560]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012629]Done.

[00012660]Version checking[1]...
[00012718][03 06][00] v2.1.6.18 -> v2.4.20.50 need upgrade.
[00012783][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012819][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012922][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013018][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013047][11 01][00] v1.6.1.0 -> v2.0.0.33
[00013118][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013197][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013296][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013397][12 03][00] v1.12.0.0 -> v1.12.0.0
[00025934][15 00][00] device not detected.
[00026012][17 00][00] v0.0.0.0 -> v1.1.1.7 need upgrade.
[00026112][17 01][00] v0.0.0.0 -> v1.0.2.7 need upgrade.
[00026172][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026204][01 00][00] v1.32.5432 -> v1.32.5432
[00026239][01 01][00] v1.32.5432 -> v1.32.5432
[00038780][08 00][00] device not detected.
[00038913][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00038951]Done.

[00040983]Waiting for user confirm...
[00051014]Timeout, start upgrade automatically.

[00051079]Firmware upgrading[1]...
[00051141][17 00] Firmware upgrade start...
[00131647][17 00] Firmware upgrade finished successfully.
[00131690][17 01] Firmware upgrade start...
[00193130][17 01] Firmware upgrade finished successfully.
[00193172][11 00] Firmware upgrade start...
[00243065][11 00] Firmware upgrade finished successfully.
[00243113][03 05] Firmware upgrade start...
[00320682][03 05] Firmware upgrade finished successfully.
[00320929][03 06] Firmware upgrade start...
[00012910]========== remo-con disconnect. boot(15) ============
[00013034]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00013153]Packet upgrade start...

[00013282]Packet checking...
[00013411]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013560]Done.

[00013659]Version checking[1]...
[00013751][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00013911][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014047][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00088529]========== remo-con disconnect. boot(15) ============
[00088561]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00088598]Packet upgrade start...

[00088631]Packet checking...
[00088663]Packet vlink 01.11.0020 <-> 01.11.0020.
[00088725]Done.

[00088762]Version checking[1]...
[00088814][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00088874][03 05][00] v34.2.0.9 -> v34.2.0.9
[00088913][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00101453][11 00][00] device not detected.
[00113984][11 01][00] device not detected.
[00126523][12 00][00] device not detected.
[00139051][12 01][00] device not detected.
[00151580][12 02][00] device not detected.
[00164107][12 03][00] device not detected.
[00164234][15 00][00] v1.1.2.0 -> v1.1.2.0
[00176764][17 00][00] device not detected.
[00189293][17 01][00] device not detected.
[00189430][19 00][00] v1.0.8.96 -> v1.0.8.96
[00189460][01 00][00] v1.32.5432 -> v1.32.5432
[00189490][01 01][00] v1.32.5432 -> v1.32.5432
[00189546][08 00][00] v0.11.0.4 -> v0.13.0.7 need upgrade.
[00189590][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00189621]Done.

[00191649]Waiting for user confirm...
[00201677]Timeout, start upgrade automatically.

[00201740]Firmware upgrading[1]...
[00201770][08 00] Firmware checksum failed.
[00201800]Packet upgrade failed at firmware upgrade.



[00056585]========== remo-con disconnect. boot(15) ============
[00056616]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00056655]Packet upgrade start...

[00056691]Packet checking...
[00056725]Packet vlink 01.11.0020 <-> 01.11.0020.
[00056790]Done.

[00056830]Version checking[1]...
[00056898][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00056958][03 05][00] v34.2.0.9 -> v34.2.0.9
[00057003][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00069541][11 00][00] device not detected.
[00082071][11 01][00] device not detected.
[00012509]========== remo-con disconnect. boot(15) ============
[00012543]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012576]Packet upgrade start...

[00012619]Packet checking...
[00012656]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012719]Done.

[00012759]Version checking[1]...
[00012814][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00012894][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012941][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00025474][11 00][00] device not detected.
[00038011][11 01][00] device not detected.
[00012481]========== remo-con disconnect. boot(15) ============
[00012515]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012548]Packet upgrade start...

[00012587]Packet checking...
[00012622]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012687]Done.

[00012720]Version checking[1]...
[00012786][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00012921][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012962][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012480]========== remo-con disconnect. boot(15) ============
[00012512]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012545]Packet upgrade start...

[00012581]Packet checking...
[00012620]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012686]Done.

[00012720]Version checking[1]...
[00012787][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00012866][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012904][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00012820]========== remo-con disconnect. boot(15) ============
[00012855]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012889]Packet upgrade start...

[00012931]Packet checking...
[00012966]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013031]Done.

[00013065]Version checking[1]...
[00013126][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00013186][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013228][04 00][00] v1.36.0.0 -> v1.48.0.0 need upgrade.
[00025763][11 00][00] device not detected.
[00038297][11 01][00] device not detected.
[00050838][12 00][00] device not detected.
[00063369][12 01][00] device not detected.
[00075906][12 02][00] device not detected.
[00088442][12 03][00] device not detected.
[00100973][15 00][00] device not detected.
[00113506][17 00][00] device not detected.
[00126044][17 01][00] device not detected.
[00126102][19 00][00] v1.0.8.96 -> v1.0.8.96
[00126152][01 00][00] v1.32.5432 -> v1.32.5432
[00126192][01 01][00] v1.32.5432 -> v1.32.5432
[00138728][08 00][00] device not detected.
[00138783][09 00][00] v1.7.0.3 -> v4.1.0.0 need upgrade.
[00138823]Done.

[00140856]Waiting for user confirm...
[00150890]Timeout, start upgrade automatically.

[00150955]Firmware upgrading[1]...
[00151201][03 06] Firmware upgrade start...
[00530875][03 06] Firmware upgrade finished successfully.
[00531031][09 00] Firmware upgrade start...
[00583223][09 00] Firmware upgrade finished successfully.
[00583282][04 00] Firmware upgrade start...
[00012434]========== remo-con disconnect. boot(15) ============
[00012469]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012503]Packet upgrade start...

[00012544]Packet checking...
[00012577]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012647]Done.

[00012683]Version checking[1]...
[00012773][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012853][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012899][04 00][00] v0.0.0.0 -> v1.48.0.0 need upgrade.
[00013033][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.
[00013153][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.
[00013188][11 01][00] v1.6.1.0 -> v2.0.0.33
[00013293][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013384][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013484][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013589][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026127][15 00][00] device not detected.
[00026222][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026343][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026390][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026426][01 00][00] v1.32.5432 -> v1.32.5432
[00026464][01 01][00] v1.32.5432 -> v1.32.5432
[00038999][08 00][00] device not detected.
[00039070][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039103]Done.

[00041145]Waiting for user confirm...
[00051179]Timeout, start upgrade automatically.

[00051251]Firmware upgrading[1]...
[00051301][11 00] Firmware upgrade start...
[00098252][11 00] Firmware upgrade finished successfully.
[00098313][04 00] Firmware upgrade start...
[00012434]========== remo-con disconnect. boot(15) ============
[00012469]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012504]Packet upgrade start...

[00012545]Packet checking...
[00012586]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012653]Done.

[00012687]Version checking[1]...
[00012758][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012823][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012946][04 00][00] v0.0.0.0 -> v1.48.0.0 need upgrade.
[00013058][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013180][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013214][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013313][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013392][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013492][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013572][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026113][15 00][00] device not detected.
[00026208][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026353][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026403][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026445][01 00][00] v1.32.5432 -> v1.32.5432
[00026481][01 01][00] v1.32.5432 -> v1.32.5432
[00039017][08 00][00] device not detected.
[00039084][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039123]Done.

[00041158]Waiting for user confirm...
[00051193]Timeout, start upgrade automatically.

[00051265]Firmware upgrading[1]...
[00051330][04 00] Firmware upgrade start...
[00100556][04 00] Firmware upgrade finished successfully.
[00100594]Done.

[00100630]Version checking[2]...
[00100713][03 06][00] v2.4.20.50 -> v2.4.20.50
[00100783][03 05][00] v34.2.0.9 -> v34.2.0.9
[00100843][04 00][05] v1.48.0.0 -> v1.48.0.0
[00100944][11 00][00] v1.8.0.0 -> v1.8.0.0
[00101064][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00101102][11 01][00] v1.8.0.0 -> v2.0.0.33
[00101198][12 00][00] v1.12.0.0 -> v1.12.0.0
[00101324][12 01][00] v1.12.0.0 -> v1.12.0.0
[00101425][12 02][00] v1.12.0.0 -> v1.12.0.0
[00101513][12 03][00] v1.12.0.0 -> v1.12.0.0
[00114048][15 00][00] device not detected.
[00114133][17 00][00] v1.1.1.7 -> v1.1.1.7
[00114259][17 01][00] v1.0.2.7 -> v1.0.2.7
[00114308][19 00][00] v1.0.8.96 -> v1.0.8.96
[00114344][01 00][00] v1.32.5432 -> v1.32.5432
[00114388][01 01][00] v1.32.5432 -> v1.32.5432
[00126928][08 00][00] device not detected.
[00126990][09 00][00] v4.1.0.0 -> v4.1.0.0
[00127035]Packet upgrade failed at version checking.



[00012448]========== remo-con disconnect. boot(15) ============
[00012485]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012519]Packet upgrade start...

[00012558]Packet checking...
[00012601]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012669]Done.

[00012708]Version checking[1]...
[00012794][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012899][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012950][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013077][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013194][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013234][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013327][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013434][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013533][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013648][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026187][15 00][00] device not detected.
[00026303][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026443][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026510][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026553][01 00][00] v1.32.5432 -> v1.32.5432
[00026595][01 01][00] v1.32.5432 -> v1.32.5432
[00039134][08 00][00] device not detected.
[00039189][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039229]Packet upgrade failed at version checking.



[00014685]========== remo-con disconnect. boot(15) ============
[00014726]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xc30510a5].
[00014770]Packet upgrade start...

[00014810]Packet checking...
[00014852]Packet vlink 01.11.0020 <-> 01.11.0020.
[00014924]Done.

[00014970]Version checking[1]...
[00015053][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015132][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015178][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015332][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015452][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015491][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015580][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015680][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015780][12 02][00] v1.12.0.0 -> v1.12.0.0
[00015965][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028507][15 00][00] device not detected.
[00028601][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028746][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028807][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028849][01 00][00] v1.32.5432 -> v1.32.5432
[00028889][01 01][00] v1.32.5432 -> v1.32.5432
[00041430][08 00][00] device not detected.
[00041487][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041527]Packet upgrade failed at version checking.



[00012584]========== remo-con disconnect. boot(15) ============
[00012640]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xc30510a5].
[00012691]Packet upgrade start...

[00012736]Packet checking...
[00012778]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012848]Done.

[00012890]Version checking[1]...
[00012970][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013050][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013101][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013231][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013370][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013409][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013525][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013629][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013729][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013818][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026360][15 00][00] device not detected.
[00026455][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026579][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026647][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026687][01 00][00] v1.32.5432 -> v1.32.5432
[00026727][01 01][00] v1.32.5432 -> v1.32.5432
[00039268][08 00][00] device not detected.
[00039350][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039390]Packet upgrade failed at version checking.



[00014561]========== remo-con disconnect. boot(15) ============
[00014604]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00014641]Packet upgrade start...

[00014684]Packet checking...
[00014722]Packet vlink 01.11.0020 <-> 01.11.0020.
[00014797]Done.

[00014836]Version checking[1]...
[00015014][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015114][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015161][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015294][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015415][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015462][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015563][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015663][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015764][12 02][00] v1.12.0.0 -> v1.12.0.0
[00015863][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028402][15 00][00] device not detected.
[00028523][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028663][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028728][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028767][01 00][00] v1.32.5432 -> v1.32.5432
[00028810][01 01][00] v1.32.5432 -> v1.32.5432
[00041351][08 00][00] device not detected.
[00041410][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041457]Packet upgrade failed at version checking.



[00013264]========== remo-con disconnect. boot(15) ============
[00013301]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00013345]Packet upgrade start...

[00013396]Packet checking...
[00013454]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013526]Done.

[00013565]Version checking[1]...
[00013624][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013684][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013746][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013868][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013984][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014031][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014121][12 00][00] v1.12.0.0 -> v1.12.0.0
[00014193][12 01][00] v1.12.0.0 -> v1.12.0.0
[00014273][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014369][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026908][15 00][00] device not detected.
[00026993][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027114][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027174][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027219][01 00][00] v1.32.5432 -> v1.32.5432
[00027259][01 01][00] v1.32.5432 -> v1.32.5432
[00039810][08 00][00] device not detected.
[00039975][09 00][00] v4.1.0.0 -> v4.1.0.0
[00040015]Packet upgrade failed at version checking.



[00015221]========== remo-con disconnect. boot(15) ============
[00015259]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00015304]Packet upgrade start...

[00015349]Packet checking...
[00015390]Packet vlink 01.11.0020 <-> 01.11.0020.
[00015468]Done.

[00015510]Version checking[1]...
[00015602][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015678][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015724][04 00][00] v1.48.0.0 -> v1.48.0.0
[00018346][11 00][00] v1.8.0.0 -> v1.8.0.0
[00018462][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00018502][11 01][00] v1.8.0.0 -> v2.0.0.33
[00018618][12 00][00] v1.12.0.0 -> v1.12.0.0
[00018722][12 01][00] v1.12.0.0 -> v1.12.0.0
[00018823][12 02][00] v1.12.0.0 -> v1.12.0.0
[00018913][12 03][00] v1.12.0.0 -> v1.12.0.0
[00031463][15 00][00] device not detected.
[00031547][17 00][00] v1.1.1.7 -> v1.1.1.7
[00031666][17 01][00] v1.0.2.7 -> v1.0.2.7
[00031722][19 00][00] v1.0.8.96 -> v1.0.8.96
[00031767][01 00][00] v1.32.5432 -> v1.32.5432
[00031812][01 01][00] v1.32.5432 -> v1.32.5432
[00044354][08 00][00] device not detected.
[00044423][09 00][00] v4.1.0.0 -> v4.1.0.0
[00044464]Packet upgrade failed at version checking.



[00014801]========== remo-con disconnect. boot(15) ============
[00014846]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00014890]Packet upgrade start...

[00014942]Packet checking...
[00014989]Packet vlink 01.11.0020 <-> 01.11.0020.
[00015066]Done.

[00015109]Version checking[1]...
[00015188][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015268][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015322][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015449][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015567][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015611][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015732][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015897][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015997][12 02][00] v1.12.0.0 -> v1.12.0.0
[00016101][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028650][15 00][00] device not detected.
[00028736][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028857][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028913][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028958][01 00][00] v1.32.5432 -> v1.32.5432
[00029010][01 01][00] v1.32.5432 -> v1.32.5432
[00041556][08 00][00] device not detected.
[00041613][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041667]Packet upgrade failed at version checking.



[00012487]========== remo-con disconnect. boot(15) ============
[00012528]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012570]Packet upgrade start...

[00012620]Packet checking...
[00012664]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012736]Done.

[00012783]Version checking[1]...
[00012876][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012956][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013002][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013137][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013256][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013296][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013401][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013504][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013609][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013745][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026294][15 00][00] device not detected.
[00026385][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026528][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026580][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026632][01 00][00] v1.32.5432 -> v1.32.5432
[00026673][01 01][00] v1.32.5432 -> v1.32.5432
[00039214][08 00][00] device not detected.
[00039301][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039341]Packet upgrade failed at version checking.



[00012593]========== remo-con disconnect. boot(15) ============
[00012635]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012676]Packet upgrade start...

[00012729]Packet checking...
[00012864]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012937]Done.

[00012980]Version checking[1]...
[00013080][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013158][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013213][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013338][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013476][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013638][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013740][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013838][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013947][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014047][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026590][15 00][00] device not detected.
[00026686][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026820][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026897][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026941][01 00][00] v1.32.5432 -> v1.32.5432
[00026985][01 01][00] v1.32.5432 -> v1.32.5432
[00039544][08 00][00] device not detected.
[00039617][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039657]Packet upgrade failed at version checking.



[00278516]========== remo-con disconnect. boot(15) ============
[00278556]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00278598]Packet upgrade start...

[00278647]Packet checking...
[00278696]Packet vlink 01.11.0020 <-> 01.11.0020.
[00278771]Done.

[00278812]Version checking[1]...
[00278918][03 06][00] v2.4.20.50 -> v2.4.20.50
[00278998][03 05][00] v34.2.0.9 -> v34.2.0.9
[00279064][04 00][00] v1.48.0.0 -> v1.48.0.0
[00279181][11 00][00] v1.8.0.0 -> v1.8.0.0
[00279326][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00279375][11 01][00] v1.8.0.0 -> v2.0.0.33
[00279492][12 00][00] v1.12.0.0 -> v1.12.0.0
[00279592][12 01][00] v1.12.0.0 -> v1.12.0.0
[00279691][12 02][00] v1.12.0.0 -> v1.12.0.0
[00279791][12 03][00] v1.12.0.0 -> v1.12.0.0
[00292335][15 00][00] device not detected.
[00292432][17 00][00] v1.1.1.7 -> v1.1.1.7
[00292572][17 01][00] v1.0.2.7 -> v1.0.2.7
[00292639][19 00][00] v1.0.8.96 -> v1.0.8.96
[00292762][01 00][00] v1.32.5432 -> v1.32.5432
[00292805][01 01][00] v1.32.5432 -> v1.32.5432
[00305350][08 00][00] device not detected.
[00305420][09 00][00] v4.1.0.0 -> v4.1.0.0
[00305463]Packet upgrade failed at version checking.



[00816717]========== remo-con disconnect. boot(15) ============
[00816766]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00816809]Packet upgrade start...

[00816863]Packet checking...
[00816906]Packet vlink 01.11.0020 <-> 01.11.0020.
[00816979]Done.

[00817030]Version checking[1]...
[00817111][03 06][00] v2.4.20.50 -> v2.4.20.50
[00817196][03 05][00] v34.2.0.9 -> v34.2.0.9
[00817246][04 00][00] v1.48.0.0 -> v1.48.0.0
[00817358][11 00][00] v1.8.0.0 -> v1.8.0.0
[00817476][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00817526][11 01][00] v1.8.0.0 -> v2.0.0.33
[00817600][12 00][00] v1.12.0.0 -> v1.12.0.0
[00817691][12 01][00] v1.12.0.0 -> v1.12.0.0
[00817779][12 02][00] v1.12.0.0 -> v1.12.0.0
[00817875][12 03][00] v1.12.0.0 -> v1.12.0.0
[00830418][15 00][00] device not detected.
[00830520][17 00][00] v1.1.1.7 -> v1.1.1.7
[00830645][17 01][00] v1.0.2.7 -> v1.0.2.7
[00830706][19 00][00] v1.0.8.96 -> v1.0.8.96
[00830754][01 00][00] v1.32.5432 -> v1.32.5432
[00830798][01 01][00] v1.32.5432 -> v1.32.5432
[00843361][08 00][00] device not detected.
[00843426][09 00][00] v4.1.0.0 -> v4.1.0.0
[00843468]Packet upgrade failed at version checking.



[00117329]========== remo-con disconnect. boot(15) ============
[00117375]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00117424]Packet upgrade start...

[00117481]Packet checking...
[00117529]Packet vlink 01.11.0020 <-> 01.11.0020.
[00117604]Done.

[00117659]Version checking[1]...
[00117741][03 06][00] v2.4.20.50 -> v2.4.20.50
[00117840][03 05][00] v34.2.0.9 -> v34.2.0.9
[00117895][04 00][00] v1.48.0.0 -> v1.48.0.0
[00118022][11 00][00] v1.8.0.0 -> v1.8.0.0
[00118140][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00118275][11 01][00] v1.8.0.0 -> v2.0.0.33
[00118393][12 00][00] v1.12.0.0 -> v1.12.0.0
[00118493][12 01][00] v1.12.0.0 -> v1.12.0.0
[00118593][12 02][00] v1.12.0.0 -> v1.12.0.0
[00118693][12 03][00] v1.12.0.0 -> v1.12.0.0
[00131242][15 00][00] device not detected.
[00131330][17 00][00] v1.1.1.7 -> v1.1.1.7
[00131475][17 01][00] v1.0.2.7 -> v1.0.2.7
[00131545][19 00][00] v1.0.8.96 -> v1.0.8.96
[00131591][01 00][00] v1.32.5432 -> v1.32.5432
[00131649][01 01][00] v1.32.5432 -> v1.32.5432
[00144197][08 00][00] device not detected.
[00144267][09 00][00] v4.1.0.0 -> v4.1.0.0
[00144322]Packet upgrade failed at version checking.



[00014658]========== remo-con disconnect. boot(15) ============
[00014706]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00014753]Packet upgrade start...

[00014798]Packet checking...
[00014844]Packet vlink 01.11.0020 <-> 01.11.0020.
[00014925]Done.

[00014968]Version checking[1]...
[00015052][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015131][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015181][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015293][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015433][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015477][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015592][12 00][00] v1.12.0.0 -> v1.12.0.0
[00015683][12 01][00] v1.12.0.0 -> v1.12.0.0
[00015782][12 02][00] v1.12.0.0 -> v1.12.0.0
[00015863][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028404][15 00][00] device not detected.
[00028503][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028643][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028704][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028750][01 00][00] v1.32.5432 -> v1.32.5432
[00028794][01 01][00] v1.32.5432 -> v1.32.5432
[00041340][08 00][00] device not detected.
[00041403][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041450]Packet upgrade failed at version checking.



[00012531]========== remo-con disconnect. boot(15) ============
[00012576]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012704]Packet upgrade start...

[00012794]Packet checking...
[00012842]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012922]Done.

[00012966]Version checking[1]...
[00013031][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013113][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013165][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013272][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013552][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013600][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013701][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013792][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013881][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013981][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026531][15 00][00] device not detected.
[00026622][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026736][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026801][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026848][01 00][00] v1.32.5432 -> v1.32.5432
[00026894][01 01][00] v1.32.5432 -> v1.32.5432
[00039448][08 00][00] device not detected.
[00039522][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039567]Packet upgrade failed at version checking.



[00012591]========== remo-con disconnect. boot(15) ============
[00012640]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012684]Packet upgrade start...

[00012732]Packet checking...
[00012783]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012860]Done.

[00012911]Version checking[1]...
[00013000][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013100][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013153][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013280][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013399][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013451][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013545][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013648][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013749][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013849][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026391][15 00][00] device not detected.
[00026510][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026747][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026821][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026866][01 00][00] v1.32.5432 -> v1.32.5432
[00026912][01 01][00] v1.32.5432 -> v1.32.5432
[00039465][08 00][00] device not detected.
[00039536][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039581]Packet upgrade failed at version checking.



[00012531]========== remo-con disconnect. boot(15) ============
[00012576]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x43428892].
[00012624]Packet upgrade start...

[00012675]Packet checking...
[00012726]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012799]Done.

[00012851]Version checking[1]...
[00012932][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013015][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013069][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013191][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013316][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013369][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013464][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013564][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013640][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013745][12 03][00] v1.12.0.0 -> v1.12.0.0
[00026293][15 00][00] device not detected.
[00026402][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026525][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026580][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026627][01 00][00] v1.32.5432 -> v1.32.5432
[00026678][01 01][00] v1.32.5432 -> v1.32.5432
[00039226][08 00][00] device not detected.
[00039300][09 00][00] v4.1.0.0 -> v4.1.0.0
[00039355]Packet upgrade failed at version checking.



[00014882]========== remo-con disconnect. boot(15) ============
[00014932]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x280133c2].
[00014983]Packet upgrade start...

[00015036]Packet checking...
[00015081]Packet vlink 01.11.0020 <-> 01.11.0020.
[00015167]Done.

[00015213]Version checking[1]...
[00015301][03 06][00] v2.4.20.50 -> v2.4.20.50
[00015381][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015450][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015663][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015781][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015838][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015935][12 00][00] v1.12.0.0 -> v1.12.0.0
[00016040][12 01][00] v1.12.0.0 -> v1.12.0.0
[00016124][12 02][00] v1.12.0.0 -> v1.12.0.0
[00016227][12 03][00] v1.12.0.0 -> v1.12.0.0
[00028776][15 00][00] device not detected.
[00028885][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029015][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029087][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029135][01 00][00] v1.32.5432 -> v1.32.5432
[00029189][01 01][00] v1.32.5432 -> v1.32.5432
[00041739][08 00][00] device not detected.
[00041806][09 00][00] v4.1.0.0 -> v4.1.0.0
[00041863]Packet upgrade failed at version checking.
2019-6-10
Use props
KenDuke
First Officer
Flight distance : 50837 ft
United States
Offline

fans94a8fc8f Posted at 2-17 13:23
HI. I have a p3 professional and crashed it and damaged the camera. So I put an advanced camera on it   Brand new. And now I have the esc error. Can u help

Sorry to hear about your crash.  However, the camera  you put on is just a 2.7K camera, and not the 4K camera the Pro comes with.  

The ESC error is a software related issue, that DJI will not release to the general public.  You have to ask for it.

DJI Susan and Thor are handing out the BIN file that fixes this issue on most peoples Phantom 3.
2019-6-12
Use props
Dante.Pinkman
lvl.2
Flight distance : 49150 ft

Argentina
Offline

DJI Thor Posted at 6-10 01:14
Hi Dante, I am sorry for the late reply. I had sent you PM, please kindly check.

The upgrade works perfect, thanks
2019-6-22
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

Dante.Pinkman Posted at 6-22 02:40
The upgrade works perfect, thanks

It's great to know the result, thank you for getting back. Happy flying!
2019-6-23
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

DJI Phantom3Pro Posted at 6-10 16:46
I believe I have a firmware issue.  The only indication I have is no image transmission from the camera.  The AC seems to function normally otherwise.  I downloaded the current firmware and with the controller turned off, attempted to "upgrade" the firmware.  I captured the firmware log file on my MAC and is pasted below.  Any suggestions would be most appreciated!

[00012240][01 00] Firmware upgrade finished successfully.

I am sorry for the late reply. For the issue, please provide a screenshot of the DJI GO app and the firmware info (General Settings > About) when connecting the drone and controller for further checking. Thank you.  
2019-6-23
Use props
wolfie212
lvl.2
Flight distance : 107018 ft
United States
Offline

been having same esc error after upgrading. Susan sent me the bin it tried to updte but shows failed. but the app is now showing 1.11.20+ and drone still will not start. any other ideas.
2019-6-28
Use props
djiuser_JI0H3nD4VPsu
lvl.1
Flight distance : 20167 ft
Vietnam
Offline

Hey DJI Thor, I'm experiencing the same problem. Would you please send me the firmware you talk about?
gmail : ngaithien23@gmail.com
2019-6-28
Use props
DJI Susan
Administrator

Offline

djiuser_JI0H3nD4VPsu Posted at 6-28 19:11
Hey DJI Thor, I'm experiencing the same problem. Would you please send me the firmware you talk about?
gmail :

I've received your message in PM and responded as well, please kindly check later, thanks!
2019-7-4
Use props
DJI Susan
Administrator

Offline

wolfie212 Posted at 6-28 14:03
been having same esc error after upgrading. Susan sent me the bin it tried to updte but shows failed. but the app is now showing 1.11.20+ and drone still will not start. any other ideas.

Sorry for the late response. If the issue remains after updating to V1.11.30, please kindly start a case and send the unit in for diagnosis: https://www.dji.com/support

BTW, if you need one's attention, please kindly click the reply button under one's message, so that he/she can get the reminder and handle it timely, thanks!
2019-7-4
Use props
djiuser_usMNhFoE7Apx
lvl.1
Flight distance : 209760 ft
United States
Offline

Having same ESC Status Error on Phantom 3 Pro.

No crashes. Latest firmware installed.

Can you send me the .bin file that you have sent others that had this same problem?
2019-7-6
Use props
djiuser_usMNhFoE7Apx
lvl.1
Flight distance : 209760 ft
United States
Offline

Why does it take days to have someone send me a simple link?
2019-7-9
Use props
djiuser_usMNhFoE7Apx
lvl.1
Flight distance : 209760 ft
United States
Offline

DJI Susan Posted at 7-4 00:48
Sorry for the late response. If the issue remains after updating to V1.11.30, please kindly start a case and send the unit in for diagnosis: https://www.dji.com/support

BTW, if you need one's attention, please kindly click the reply button under one's message, so that he/she can get the reminder and handle it timely, thanks!

Can I please get a link to the v 1.11.30 bin file please?
2019-7-9
Use props
DJI Susan
Administrator

Offline

djiuser_usMNhFoE7Apx Posted at 7-9 21:20
Can I please get a link to the v 1.11.30 bin file please?

Sorry for the late response. I've sent you a message in PM, please kindly check later, thanks!
2019-7-11
Use props
fans67f7a24c
New

United States
Offline

Hello, coming into this thread late but I just updated the firmware on my P3P after not flying it for a couple years and now I am getting ESC status error everything. Please help
2020-5-4
Use props
samMK
lvl.1
Flight distance : 3599 ft

Canada
Offline

Hello, i'm having problem with my Phantom 3 pro.Recently i update now it is giving me ESC status error. Anyone can help Please
2020-8-25
Use props
Lindosvaldo
lvl.2
Flight distance : 620748 ft

Brazil
Offline

OI, Bom dia;
possuo o P3/ADV
serial number: P76UDL0282005F
e tenho tido o seguinte mensagem de erro: ESC STATUS ERROR
os motores não ligam
o drone não sofreu queda
ele foi guardado voando normalmente e quando fui usar apareceu este erro
me ajude por favor?
2020-9-9
Use props
franklinrocha2010gmail.com
lvl.1
Flight distance : 80928 ft
Brazil
Offline

Estou com um phantom 3advanced  com erro de esc disseram que tinha que trocar a placa ai comprei uma e deu o mesmo erro o drone está com a última atualização quem pode me ajudar
2020-9-15
Use props
franklinrocha2010gmail.com
lvl.1
Flight distance : 80928 ft
Brazil
Offline

I have a 3advanced phantom with an esc error they said I had to change the card there I bought one and it gave the same error the drone has the latest update who can help me
2020-9-15
Use props
franklinrocha2010gmail.com
lvl.1
Flight distance : 80928 ft
Brazil
Offline

DJI Susan Posted at 2019-7-4 00:48
Sorry for the late response. If the issue remains after updating to V1.11.30, please kindly start a case and send the unit in for diagnosis: https://www.dji.com/support

BTW, if you need one's attention, please kindly click the reply button under one's message, so that he/she can get the reminder and handle it timely, thanks!

Preciso da atualização 1130 estou com o mesmo problema de erro de esc no meu phantom 3advanced meu email é franklinrocha2010@gmail.com
2020-9-16
Use props
12Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules