2018.03.30

• Firmware Version: v1.31.0.00
• DJI Pilot App Android Version: v0.5.1
• DJI GO App iOS Version: V3.1.30
• DJI GO App Android Version: V3.1.28
  

Major Updates

• Fixed an issue where users can't take photos when using OSDK.
• Fixed an issue where the photos’ aperture display incorrectly in EXIF.
• Optimized gimbal performance.
  

Notes

• This firmware upgrade is for the Zenmuse XT gimbal and camera only. It cannot be used to update the aircraft or the Intelligent Flight Battery.
• The Zenmuse XT must be connected to the Inspire 1, Matrice 100, Matrice 600, and Matrice 200 before starting this update, which requires a Zenmuse XT Gimbal Adapter.
• Ensure that there is no other firmware package on the Micro SD card and that the battery level is above 50%.
• It will take approximately 5 minutes to upgrade the firmware. The aircraft will beep when the upgrade is complete.
  

Firmware download link: https://www.dji.com/zenmuse-xt/info#downloads

2018.03.30

• Firmware Version: v1.31.0.00
• DJI Pilot App Android Version: v0.5.1
• DJI GO App iOS Version: V3.1.30
• DJI GO App Android Version: V3.1.28
  

Major Updates

• Fixed an issue where users can't take photos when using OSDK.
• Fixed an issue where the photos’ aperture display incorrectly in EXIF.
• Optimized gimbal performance.
  

Notes

• This firmware upgrade is for the Zenmuse XT gimbal and camera only. It cannot be used to update the aircraft or the Intelligent Flight Battery.
• The Zenmuse XT must be connected to the Inspire 1, Matrice 100, Matrice 600, and Matrice 200 before starting this update, which requires a Zenmuse XT Gimbal Adapter.
• Ensure that there is no other firmware package on the Micro SD card and that the battery level is above 50%.
• It will take approximately 5 minutes to upgrade the firmware. The aircraft will beep when the upgrade is complete.
  

Firmware download link: https://www.dji.com/zenmuse-xt/info#downloads