Hi,

Is there a way with the P4P+ controller to get the video cache to save to an sd card, rather than the inbuilt storage in the controller?

No, that's not possible.

Mike, please expain the procedure. Thanks.

Or, Edit: Thanks for your response, too bad it's impossible. Ha

RedHotPoker

RedHotPoker Posted at 2018-4-3 09:26
Mike, please expain the procedure. Thanks.

There is no procedure, he said it is NOT possible.

Hi there, it doesn't support caching the video on the RC SD card. Thank you for your support.

Thanks for the responses. I guess that's why I couldn't find it documented anywhere...

Geebax Posted at 2018-4-3 16:44
There is no procedure, he said it is NOT possible.

That's not what he wrote, originally.
The first reply, He said it shouldn't be a problem.
Why would I request instructions for a procedure that wasn't do-able.
Try and keep up, ok? Hahaha

So he changed his thought. Cool. Me too.


RedHotPoker

RedHotPoker Posted at 2018-4-4 08:36
That's not what he wrote, originally.
The first reply, He said it shouldn't be a problem.
Why would I request instructions for a procedure that wasn't do-able.

Not seeing that...

msinger Posted at 2018-4-3 08:33
No, that's not possible.

I thought you said it would be doable.

Why not put Edit in your reply? ;-)

If you were mistaken, no big deal.

Why you didn't reply to my question, obviously...


RedHotPoker

Anokadrone Posted at 2018-4-4 08:39
Not seeing that...

No, because it was edited after the fact, of what I wrote. Get it??


Don't be daft ok. I know what I read, and why I had responded accordingly.

If I had quoted his response, then what?  You would not be commenting.

RedHotPoker

RedHotPoker Posted at 2018-4-4 08:36
That's not what he wrote, originally.
The first reply, He said it shouldn't be a problem.
Why would I request instructions for a procedure that wasn't do-able.

I didn't change anything. That was my original reply.

It would be nice to know what is meant by the statement ''Provide extra storage space for the display device, maximum supporting 128 GB'' for the SD card slot in the manual.

KedDK Posted at 2018-4-4 22:49
It would be nice to know what is meant by the statement ''Provide extra storage space for the display device, maximum supporting 128 GB'' for the SD card slot in the manual.

I agree, it doesnt make a lot of sense.  I am using a 128 Gb iPad and the extra storage is of no real use except to install more "apps".  I am thinking the statement refers to the SD slot having a capacity of 128 Gb.  

RedHotPoker Posted at 2018-4-4 08:44
No, because it was edited after the fact, of what I wrote. Get it??

I calls 'em hows I sees 'em.

it is possible but its a big job. Something that would be a breeeeeze for DJI to include in their next update. Rest assured, i am sure their engineers are looking at it              

msinger Posted at 2018-4-4 16:23
I didn't change anything. That was my original reply.

Um, yeah ok. ;-)

What ever you say...


I must have been daydreaming about night things... Ha

Which I know isn't true...

RedHotPoker

Anokadrone Posted at 2018-4-5 03:29
I calls 'em hows I sees 'em.

Yes, you do have that monocle. Must be true.

Besides I read it on the Internet, where all things are possible... Ha

I went to Tandy Leather yesterday, and bought my crocodile back strips that were on hold for me...
Red shirt Wednesday, you get $5.00 off your purchase, if you have on the Scarlet or Crimson attire. ;-)



RedHotPoker

RedHotPoker Posted at 2018-4-5 08:53
Um, yeah ok. ;-)

What ever you say...

Well, keep your head out of the clouds, friend ;)

FWIW, I own a P4P+ remote controller. I would have no reason to come back and edit that answer since I know how it works.

msinger Posted at 2018-4-5 12:16
Well, keep your head out of the clouds, friend ;)

FWIW, I own a P4P+ remote controller. I would have no reason to come back and edit that answer since I know how it works.

Yes. Mike never made a mistake or of a misspoken word?

It's not a matter of any clouds, my friend. Just observation.

I know what I thought I read, therefor my request for your helpful instructions.

Please have a nice day... Nice as possible. ;-)

This wouldn't be the first time I have been mistaken, or had a wrong understanding on here.


RedHotPoker

RedHotPoker Posted at 2018-4-5 16:51
Yes. Mike never made a mistake or of a misspoken word?

It's not a matter of any clouds, my friend. Just observation.

So...What are the croc back strips for?

Tearuup Posted at 2018-4-5 17:10
So...What are the croc back strips for?

They are delicious with a little BBQ sauce.

Geebax Posted at 2018-4-5 17:22
They are delicious with a little BBQ sauce.

Ah, but you are likely thinking of back straps, bro.
But you must soak the meat in brine... You know.

No this is just the tanned skin. Perfect for some of my leather craft projects.


RedHotPoker

Tearuup Posted at 2018-4-5 17:10
So...What are the croc back strips for?

I will probably make a belt out of the black strip. But for the green one? I haven't quite decided yet.
This leather isn't pliable like the alligator belly skin is. Only slightly bendable length wise, but width wise, it is too stiff to bend.  So it's uses are quite limited. It could be a shoulder strap for a case.
It's actually select , for its uses.
What would you build with it? Ha

These animals are farmed or harvested legally by the way...


RedHotPoker

RedHotPoker Posted at 2018-4-5 17:34
I will probably make a belt out of the black strip. But for the green one? I haven't quite decided yet.
This leather isn't pliable like the alligator belly skin is. Only slightly bendable length wise, but width wise, it is too stiff to bend.  So it's uses are quite limited. It could be a shoulder strap for a case.
It's actually select , for its uses.

I would probably do a holster for a small compact semi-auto.  Looks like it would last a long time and take a beating.

Geebax Posted at 2018-4-5 17:22
They are delicious with a little BBQ sauce.

Maybe, lol

Tearuup Posted at 2018-4-5 17:54
I would probably do a holster for a small compact semi-auto.  Looks like it would last a long time and take a beating.

Yes, that would look very awesome too. Ah, but this leather is not pliable like most other leather I would use. For holsters, wet molding the leather is often the best way to get a perfect snug fit.
Heck, even heavy thick 8-9 saddle skirting can be wet and molded while damp.

But this stuff is very coarse, and I'm not sure it can be modeled or reshaped very much.
It only has bend ability in the length wise, not width. It doesn't bend side to side.
I have never had this kind of exotic leather to work with before now. So wasn't prepared to work with it.

I do really like it, and am pumped to make something cool out of them. They definitely won't be wall hangers.
Besides, I don't pack heat, only herb. ;-)


RedHotPoker

RedHotPoker Posted at 2018-4-5 18:13
Yes, that would look very awesome too. Ah, but this leather is not pliable like most other leather I would use. For holsters, wet molding the leather is often the best way to get a perfect snug fit.
Heck, even heavy thick 8-9 saddle skirting can be wet and molded while damp.

Wondering if you can soften it with heat like horn?
Try making a sunshade for your device.

KedDK Posted at 2018-4-6 00:40
Wondering if you can soften it with heat like horn?
Try making a sunshade for your device.

Not sure how that could be done, as a proper shade would need to be a little deeper.



RedHotPoker

RedHotPoker Posted at 2018-4-6 00:57
Not sure how that could be done, as a proper shade would need to be a little deeper.

If it can be softened with heat then some saw/cut slices and bending would do - i imagine - for sure you would have one of it's kind.

KedDK Posted at 2018-4-6 01:04
If it can be softened with heat then some saw/cut slices and bending would do - i imagine - for sure you would have one of it's kind.

It would be one of a kind, but not very economical. These strips were $80.00 each...
I could buy a decent one for much cheaper.

A local innovative friend creatively built one, from a Mike's Hard Lemonade box. Haha
It works well, and tasted great. Chuckles


RedHotPoker

RedHotPoker Posted at 2018-4-5 18:13
Yes, that would look very awesome too. Ah, but this leather is not pliable like most other leather I would use. For holsters, wet molding the leather is often the best way to get a perfect snug fit.
Heck, even heavy thick 8-9 saddle skirting can be wet and molded while damp.

I do really like it, and am pumped to make something cool out of them. They definitely won't be wall hangers.
Besides, I don't pack heat, only herb. ;-)

Lol, I'll stick to the heat.   Would be a nice belt.

Tearuup Posted at 2018-4-6 15:06
I do really like it, and am pumped to make something cool out of them. They definitely won't be wall hangers.
Besides, I don't pack heat, only herb. ;-)

Yes, there may be two belts, not just one... ;-)


RedHotPoker

RedHotPoker Posted at 2018-4-6 17:16
Yes, there may be two belts, not just one... ;-)

Lol, I'm with you.

Tearuup Posted at 2018-4-6 18:15
Lol, I'm with you.

I just need to find two appropriate belt buckles.

Then I will know how wide the straps need to be. ;-)

Not much for archery gear these could make...


RedHotPoker

Is this what we call hijacking a thread?  I thought we were talking about DJI drones.  

Anokadrone Posted at 2018-4-6 23:33
Is this what we call hijacking a thread?  I thought we were talking about DJI drones.

The OP question was answered long time ago so no hijacking only derivative smalltalk

KedDK Posted at 2018-4-7 02:43
The OP question was answered long time ago so no hijacking only derivative smalltalk

Ok, thanks for clarifying that.  I think a more appropriate place would be http://www.facebook.com.    Marky Z. would very much appreciate your patronage.  LOL

Anokadrone Posted at 2018-4-7 04:00
Ok, thanks for clarifying that.  I think a more appropriate place would be http://www.facebook.com.    Marky Z. would very much appreciate your patronage.  LOL

http://www.facebook.com
ouch, IMO that use of ''obscene language'' is even worse than thread hijacks and also higher on the rules list