Please select Into the mobile phone version | Continue to access the computer ver.
Arming Motors - Naza M. V2 with S 900
598 1 2018-5-7
Uploading and Loding Picture ...(0/1)
o(^-^)o
blackowl
lvl.1
Flight distance : 30886 ft
Offline

I am setting up S900 with Naza M V2 using  a Futaba 8J radio transmitter. During the motor test, I only get responses from motors 3-4-5-6 and they are not in the correct order (but are spinning in right direction). If I change multicopter configuration from a Hex V to an octocopter, all the motors will respond (even 1/2), but they too do not match up to their actual motor numbers. So I know that motors 1/2 work. 6 of the 8 octocopter motors (3-8) will respond.

What am  I doing wrong? Is this a transmitter issue? Any help would be appreciated!!!

2018-5-7
Use props
DJI Elektra
Administrator
China
Offline

For you first question, please ensure if the connection of M1-M8 is correct or not. Or you can shoot a picture of it for further check. If the connection is correct, please try to flash the firmware. Please keep us updated, thanks.
2018-5-11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules