Hi all,

Up until recently, I had no problem viewing the SkyPixel 360's in VR panorama mode. Now when I look at them, the sensitivity is WAY up and it isn't a '1 to1' movement ratio. When NOT in VR mode, it is perfectly smooth but once you go VR and stick it in the Google Cardboard, it gets jerky.

I am using a Samsung Galaxy S7. I have tried it on two S7's and it is the same. On a S6 though, smooth as silk. Any suggestions? I've done the 'Calibrate Gyroscope' and keep getting a calibration failed. When the phone is laying down on the table totally still the picture is very jerky

Both S7's are up tp date with the latest Verizon firmware and have both been wiped clean.

Thanks!

Dean

-Both S7's are up tp date with the latest Verizon firmware and have both been wiped clean. -

So the S7 have Oreo
And the S6?

S-e-ven Posted at 2018-5-8 08:44
-Both S7's are up tp date with the latest Verizon firmware and have both been wiped clean. -

So the S7 have Oreo

No Oreo yet on the S7 'Coming Soon' it reads when I update. The S6 not sure about, it's not with me at the moment. Using Chrome browser if that helps!

-Using Chrome browser if that helps!-

Helps only, if you arent using chrome on the S6
I would look for the differences to spot, between the devices.
Usually the hardware should have all the needed sensors, and you wrote that it worked before.
And that on 2 S7 hardware brook coincidentely? Not really!

So the update and the whipping may have changed something.
What does the S6 have, that the S7 now do not have?

All three phones are wiped clean and updated to the latest firmware from Verizon.

Same issue calibration doesn't work and the view is too sensitive. VR Unusable on S7.

Same issue calibration doesn't work and the view is too sensitive. VR Unusable on S7.

Found a solution to my problem, by by skypixel.

roundme.com works without issue.

Hey refer to Google for more effective answer

SHERLOCKHOLMES Posted at 2020-10-19 04:24
Hey refer to Google for more effective answer

this is exactly where google brought me to

The VR goggle function no longer works on sky pixel