Crashed and burned my P3S.  After inspection everything seemed to be alright but then I noticed 1 major problem.  It seems as though I can't control the camera with my remote controller.  I can see images/video fine but can't adjust the gimbal before or during flight.  Also noticed, under normal operating when you fire up the bird the camera/gimbal goes berserk for a moment...mine doesn't do that anymore.  And I am getting a notification that I have a hardware problem, Ohhhh really?!

As an add on, I tested the ability to take pictures and video and both seem to be working fine.

Well this might explain some things.  Any idea what part # that ribbon is that's severed?

Thanks again

There is a website called dronenerds.com that offer lots of drone parts. They also have a chat option so you can probably send them your pic of the broken cable and they can point you in the right direction. Good luck and sorry about your crash.

srfcocoa\@hotmai Posted at 2018-5-10 15:56
Well this might explain some things.  Any idea what part # that ribbon is that's severed?

Thanks again

Although your drone can work normally now, I would recommend you send it back for further check for your drone's safety. Please contact our support and start a case: http://www.dji.com/support