Please select Into the mobile phone version | Continue to access the computer ver.
shaking video
1768 1 2014-10-31
Uploading and Loding Picture ...(0/1)
o(^-^)o
marcinzmyslowsk
Second Officer

Poland
Offline

Hello!

I have installed gimbal Zenmuse Gimbal H3-3D.

But I had a problem because the recorded video is shaking

Take a look:

http://www.zbieram.cyberdusk.pl/index.php?id_page=obejrzyjfilmy&id_grid=1255&kod=0020f3d7bded3c4c41a1ba6928b17617ca879af3

see duration from 0:26 (min:sec) to 0:30 (min:sec)

and

duration from 0:48 (min:sec) to 0:58 (min:sec)

I have checked the firmwares. All firmwares of my drone Phantom FC40 are up to date, but when I connect Zenmuse module which is hidden inside the drone IMU module was out of date. My firmware was 1.4 and I upgraded it into 1.10. GCU was ok and it was 1.8 version so it was actual.

Can you tell me if GCU could cause the shaking problem with my video?

Kindes regards
Marcin from Poland

2014-10-31
Use props
marcinzmyslowsk
Second Officer

Poland
Offline

After upgrading firmware of IMU from 1.4 into 1.10 I have noticed that my drone was working ok (without shaking).
But the 2nd flight was not ok. My gimbal was completely out of use. Go Pro video camera looks like it was not on any gimbal. The picture was upside down. After a few hours after charing battery I have checked only gimbal if it react on moving on x,y,z dimensions. It was working ok. But I still don`t know why my 2nd flight was so unpredictible. Take a look at this movie:



Kindest regards
Marcin
2014-11-1
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules