Hello,

With some specific reasons, I looking for gimbal which can controlled by smartphone application.

And if there's no such a thing, may I need to
- Tweak RC controller to communicate with smartphone
[ Smartphone --> WIFI(or BT) --> RC Controller --> Gimbal ]
- or make specific RF module which can communicate with smartphone.
[ Smartphone --> WIFI(or BT) --> RF module --> Gimbal ]

Tips and suggestions would be very appreciated!

Jay

DJI’s inspire and Phantom 3 gimbal can realize app controlling the camera fuction, take picutures, recording, ect.  Gimbal's movement are controlled by remote controller.

You can learn more information here
http://click.dji.com/tVmEeg5IDqvHEiOZ

DJI’s inspire and Phantom 3 gimbal can realize app controlling the camera fuction, take picutures, recording, ect.  Gimbal's movement are controlled by remote controller.

You can learn more information here
http://click.dji.com/tVmEeg5IDqvHEiOZ

DJI support 8 Posted at 2015-5-13 10:34
DJI’s inspire and Phantom 3 gimbal can realize app controlling the camera fuction, take picutures,  ...

Yes but so far I know SDK support is only limited to Inspire and Phantom yet.

Since I have to mount SONY Nex5 DSLR camera so my entire system would be
"S1000 + Zenmuse Z15 + SONY Nex5 DSLR camera"

So I'm focusing on controlling Zenmuse Z15, if there's similarity between Phantom & Zenmuse
or there's possibility to tweak SDK to control Zenmuse please let me know about it.

Thanks in advance!
Jay

salbdch Posted at 2015-5-14 11:47
Yes but so far I know SDK support is only limited to Inspire and Phantom yet.

Since I have to mou ...

Thanks for your suggestion. Currently this hasn't been realized.

DJI support 8 Posted at 2015-5-14 14:17
Thanks for your suggestion. Currently this hasn't been realized.

Okay, thanks for your concern anyway : )

Actually I'm new to this area and now I reading Zenmuse manual but hardly getting picture
how to control it.

1. To control Zenmuse, typical RC controller at ground is mandatory, right?
    and it use RF signal(sub-Ghz freq like 3~400Mhz)?
2. Then WHICH ONE is receiving RF signal at air?
    Is "RC Controller(Ground) -> GCU(Air) -> Zenmuse Z15(Air)"
    or "RC controller(Ground) -> Some device(Air) -> GCU(Air) -> Zenmuse Z15(Air)"?
    I guess it's latter because GCU seems have no RF module inside, could you let me know about it?

Thanks,
Jay

salbdch Posted at 2015-5-15 10:34
Okay, thanks for your concern anyway : )

Actually I'm new to this area and now I reading Zenmuse  ...

Hi, it is RC controller-> outer receiver connected to GCU

DJI support 8 Posted at 2015-5-19 16:23
Hi, it is RC controller-> outer receiver connected to GCU

Hello,

Sorry for my ignorance but you could you specify "outer receiver" more in detail?
(Like DJI's model name, user's manual... etc)

Thanks,
Jay