Please select Into the mobile phone version | Continue to access the computer ver.
Need WiFI module board for P3S controller
460 1 2018-5-17
Uploading and Loding Picture ...(0/1)
o(^-^)o
Amigorick
lvl.1
Flight distance : 43133 ft
United States
Offline

[size=14.666666984558105px]I have an extra controller that has a connector that has broken loose from the circuit board. It appears that the U.fl socket was only soldered on one side and pulled off while I was disconnecting the wire for one of the WiFi antenna's. My attempt at soldering it back was cut short when I noticed that the trace from the center pin had also pulled back and had dislodged a small surface-mounted component. I could not find the part, but the other socket has a component directly adjacent to it that is missing at the[size=14.666666984558105px] other connector. The two solder points where it was attached are visible. I am looking for the WiFi module that plugs into the main control board in the controller. If anyone has one, please[size=14.666666984558105px] let me know. It could be from a damaged controller that has physical damage with no harm to the electronics, etc. I can send it in [size=14.666666984558105px]for repair (non-warranty) but the cost of repair could exceed what[size=14.666666984558105px] I could purchased a used controller for on ebay. I would rath[size=14.666666984558105px]er replace the module and save this controller instead of purcha[size=14.666666984558105px]sing another.
2018-5-17
Use props
DJI Susan
Administrator
Offline

We're sorry that there are no spare parts for sale now. If you need further assistance, I'm sorry you may consider sending the unit in for diagnosis.
2018-5-20
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules