Hi Team,

I am assuming this has been asked before but i cant find it anywhere.
I am doing a roof inspection on a series of 1 and 2 storey buildings looking for defects in the roof. I have been using a p4p which has been giving me great results but that has to go to another job i now have to switch to the inspire pro for the remainder of the job.
My question is, is there a way to limit the speed of the inspire to say 3 or 4m a second similar to tripod mode on the phantom?  I am flying between 5 and 10 m above the roof so at the normal rates the inspire is way to fast and agile to get a steady enough video.

any advice is welcome!

Cheers

Hi Jimbo,

use GS Pro, setup a 'Virtual Fence' adjust the desired speed, and go ... ;-)
With it, you are defining an 3D area in which the Inspire will not go faster and higher than you setup.
You can free fly your aircraft as you wish within these boundaries, but you can not exit it, so make it large enough to have enough room to work with.

A sample screenshot below:

Keule Posted at 2018-5-24 22:20
Hi Jimbo,

use GS Pro, setup a 'Virtual Fence' adjust the desired speed, and go ... ;-)

Thanks! ill give this a try tomorrow when the weather hopefully picks up