I have N3 + LB2 + X5, I have all the X5 commands on the screen, but I can not get the X5 video image (FPV) on my tablet, they could help me, because I have an urgent need to use the X5.

Sorry for the difficulties, the installation is fine, please check the HD setting in the APP, adjust the parameter of Transmission Quality to the middle, and change the APP Output Mode as "EXT" to see if it helps, you can post the screenshot of your HD settings here if the issue persists, thank you.

DJI Mindy Posted at 2018-5-31 01:58
Sorry for the difficulties, the installation is fine, please check the HD setting in the APP, adjust the parameter of Transmission Quality to the middle, and change the APP Output Mode as "EXT" to see if it helps, you can post the screenshot of your HD settings here if the issue persists, thank you.

the problem still continues, as follows in the photos:

DJI Mindy Posted at 2018-5-31 01:58
Sorry for the difficulties, the installation is fine, please check the HD setting in the APP, adjust the parameter of Transmission Quality to the middle, and change the APP Output Mode as "EXT" to see if it helps, you can post the screenshot of your HD settings here if the issue persists, thank you.

Bruno Soares Posted at 2018-6-5 12:47
[view_image]

Did you find this link to downgrade?  https://forum.dji.com/thread-52361-1-1.html

http://dji.polybotes.feralhostin ... /Inspire%201%20Pro/

You won't have any results unless you have M600 firmware. MATRICE600_V01.10.01.40

Regijean Posted at 2018-6-5 13:48
Did you find this link to downgrade?  https://forum.dji.com/thread-52361-1-1.html

http://dji.polybotes.feralhostin ... /Inspire%201%20Pro/

I can not downgrade to FW MATRICE 600_V01.10.01.40

Bruno Soares Posted at 2018-6-5 14:40
I can not downgrade to FW MATRICE 600_V01.10.01.40

Did you try one of the list already? Like         WM610_FC550_FW_V01.04.00.70.bin

http://dji.polybotes.feralhostin ... /Inspire%201%20Pro/

Regijean Posted at 2018-6-5 17:56
Did you try one of the list already? Like         WM610_FC550_FW_V01.04.00.70.bin

http://dji.polybotes.feralhosting.com/DJI-Firmware/BIN/Inspire%201%20Pro/

I can not downgrade to any version of FW.
Start the camera with the fw in the memory card and nothing happens, it does not accept the downgrade.

Bruno Soares Posted at 2018-6-5 18:38
I can not downgrade to any version of FW.
Start the camera with the fw in the memory card and nothing happens, it does not accept the downgrade.

My apologies.