Please select Into the mobile phone version | Continue to access the computer ver.
Dji Phantom 3 pro - Problem with Jiggling
2299 10 2015-5-14
Uploading and Loding Picture ...(0/1)
o(^-^)o
danthun
lvl.1
Flight distance : 14639 ft
Sweden
Offline

Dji Phantom 3 pro - Problem with Jiggling. Has flown about 5 times and not had any problems. and suddenly when would fly so right from the start as shaking sideways. I try to change the propeller but it is equal. I have calibrated imu and Gimbel.Watch the video and you will see.
What should I do?



2015-5-14
Use props
Fulgerite
First Officer

United States
Offline

Did you calibrate the compass before flight?

Otherwise it looks like a hardware problem.

2015-5-14
Use props
danthun
lvl.1
Flight distance : 14639 ft
Sweden
Offline

Fulgerite Posted at 2015-5-15 02:46
Did you calibrate the compass before flight?

Otherwise it looks like a hardware problem.

yes absolutely, several times and it becomes the same.
2015-5-14
Use props
PaulOTron
lvl.3

United States
Offline

Remove the white foam piece from behind the gimbal maybe?  It's packing material.
2015-5-14
Use props
danthun
lvl.1
Flight distance : 14639 ft
Sweden
Offline

PaulOTron Posted at 2015-5-15 02:51
Remove the white foam piece from behind the gimbal maybe?  It's packing material.

It is removed.
2015-5-14
Use props
fineartstudio
lvl.1

Portugal
Offline


Hi!
I need help please.
Description of problem:
Problem with Jiggling. I was testing the drone for the first time then this error occurred ,  drone start shaking sideways.
I removed the foam piece from behind the gimbal and calibrated the drone, but remains the same.
Watch the video and you will see the problem.
2015-5-19
Use props
Daninho
Second Officer

Germany
Offline

Two different Problems i guess, the first video must be a gimbal problem, Maybe something went in the gimbal motor or something is blocking it etc.. it looks like a defective unit. The 2nd video is just the rolling shutter effect cause of vibrations. Some P3s have it, some not that much . Rolling shutter will appear on sunny days combined with wind the most. The Phantom1,2 and 3 can hardly compensate the vibrations to the gimbal because of the small size and stiff materials used. Normally you have to balance the motors, balance the Props or try different props (which is not possible sadly), and buy ND Filter.
2015-5-19
Use props
fineartstudio
lvl.1

Portugal
Offline

Daninho Posted at 2015-5-19 22:37
Two different Problems i guess, the first video must be a gimbal problem, Maybe something went in th ...

Thanks for the reply and for the help.
2015-5-19
Use props
pmarkus
lvl.1

Italy
Offline

fineartstudio Posted at 2015-5-19 22:09
Hi!
I need help please.
Description of problem:

Have you yet done compass and imu calibration and updated fw ?
2015-5-20
Use props
Kawaman1
lvl.1

United Kingdom
Offline

I had a similar problem with the gimbal twitching - I upgraded to firmware 1.1.6 and it was cured
2015-5-20
Use props
fineartstudio
lvl.1

Portugal
Offline

My version is 1.1.8 and same problem....
2015-5-20
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules