Please select Into the mobile phone version | Continue to access the computer ver.
I have to start the phantom twice to get the SD card to work
306 3 2018-6-15
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_DxN9oIxXFlr4
lvl.3
Flight distance : 363661 ft
United States
Offline

This started happening a few weeks ago. When i first turn on the phantom, it won't read the sd card. I've tried pulling the card out and reinserting it, won't read it. If turn the phantom on and then immediately turn it off and then back on again, it'll read the sd card. I have no clue what's going on here. It can't be that it needs to warm up, since i can turn it on and then off again within seconds. If it were a bad SD card i would expect it not to work at all, but i have no problems reading or writing to it.
2018-6-15
Use props
Geebax
Captain
Australia
Offline

Have you formatted the card in the aircraft using the DJI Go App? What card is it?
2018-6-15
Use props
Hellsgate
Captain
Flight distance : 1991555 ft
Australia
Offline

Have you tried a different card ?
2018-6-15
Use props
DJI Paladin
Super Moderator
Flight distance : 318 ft

Online

Hi, I'm sorry to hear that. After saving all your files, please try to manually format the SD card to a computer using a card reader. You can also try to use a different SD card and let me know if the issue is still the same. These are the supported SD cards for your Phantom 4 pro advanced: Micro SD Max Capacity: 128GB Write speed ≥15MB/s, Class 10 or UHS-1 rating required.
2018-6-16
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules