I'm trying to balance my Sony A7RII with the Sony FE 55mm 1.8 and the I cant get the tilt access even close. In the first step, when it says to point the camera straight up then adjust the tilt acess, I have it pushed beyond zero and the set up still falls forward when I let go. Is it even possible to balance the Sonys with a small lens on them?

May I know if you attach the Riser Plate to the bottom of the camera to see if the issue persists?

DJI Mindy Posted at 2018-6-19 00:23
May I know if you attach the Riser Plate to the bottom of the camera to see if the issue persists?[view_image]

I added the riser plate and it still wasn't quite enough to keep it from falling forward, but I added the lens support to the front of the lens and it added just enough weight. Thank you.

fans84e29f69 Posted at 2018-6-19 08:19
I added the riser plate and it still wasn't quite enough to keep it from falling forward, but I added the lens support to the front of the lens and it added just enough weight. Thank you.

Glad to know the issue has been figured out, hope you have a great time on shooting.

I’m having this issue mindy I can’t figure it out

DJI Mindy Posted at 2018-6-20 01:43
Glad to know the issue has been figured out, hope you have a great time on shooting.

I’m currently having this same issue.. Im using  the extra mounting plate still not heavy enough

Marbtheproducer Posted at 2018-8-15 21:01
I’m currently having this same issue.. Im using  the extra mounting plate still not heavy enough

I had such a problem. The trick is to mount the additional plate so that you can shift the camera all the way to the side opposite of the lens while mounting on Ronin.
Please check if you insert the plate with a correct side also.

Marbtheproducer Posted at 2018-8-15 21:01
I’m currently having this same issue.. Im using  the extra mounting plate still not heavy enough

Hi there, sorry for my late response because of the long holiday, may I know if the issue persists? Could you please try Jesaul's suggestion to see if it helps?

DJI Mindy Posted at 2018-8-21 19:12
Hi there, sorry for my late response because of the long holiday, may I know if the issue persists? Could you please try Jesaul's suggestion to see if it helps?

Im having the issue! i have a sony 6300 with alens

djiuser_995QREyZ5WO6 Posted at 2018-8-22 17:02
Im having the issue! i have a sony 6300 with alens

Hi there, may I know if you mounted the riser plate? Please make Auto Tune after balancing and check the balance status in the APP, thank you.

DJI Mindy Posted at 2018-8-23 02:26
Hi there, may I know if you mounted the riser plate? Please make Auto Tune after balancing and check the balance status in the APP, thank you.

Hi, yes i mounted the riser plate, and whe im trying to point the camera upwards it wont stay up,

djiuser_995QREyZ5WO6 Posted at 2018-8-23 06:09
Hi, yes i mounted the riser plate, and whe im trying to point the camera upwards it wont stay up,

Please try the auto-tune, the motors should be able to support that lens with no problems, may I know if the gimbal will work when you power on?