Phantom 4 Pro 2.0 Firmware V01.00.1500 released


https://forum.dji.com/thread-154139-1-1.html

Overview Date: 2018.06.26 Aircraft Firmware: V 01.00.15.00 Phantom 4 Pro V2.0 Remote Controller Firmware: V 01.00.15.00 Phantom 4 Pro+ V2.0 Remote Controller Firmware: V 01.00.01.00 DJI GO 4 App iOS: V 4.2.20 DJI GO 4 App Android: V 4.2.20 What’s New? Optimized compass calibration. Optimized gimbal performance to improve its stability during flight. Notes Once the firmware has been updated, it cannot be reverted to a previous version. Restart the aircraft and remote controller once the update is complete. If the firmware update fails, restart the aircraft, remote controller, and DJI GO 4 app/DJI Assistant 2, then try updating again.

This actually correct. DJI just recently released the new firmware version of Phantom 4 Pro V2.0. Thank you for sharing it with our co-Pilot. Keep it up and enjoy flying!

I have already updated and am heading out for a flight.  It forced an IMU calibration afterwards which tells me they did work on the sensors which is a good thing.

Due to the release notes, I am optimistic that this is intended to help the slow yaw turning and gimbal glitching that people have been experiencing.

I flew a short flight in between large thunderstorms.  Very gusty conditions so I stayed below 20'.

This updated forced an IMU calibration, reset my EXP settings, reset my brake sensitivity settings, and reset many of the obstacle settings.

So far so good with this limited flight test.  It is obvious they did some serious work on the compass and IMU code.

They also changed the DAT file log format that gets recorded on the mobile device.  They removed a ton of data fields!

I flew a test mission this morning and trended/reviewed the logs for the issue with slow yaw while hovering.

So far the results seem promising! I performed the series of maneuvers that have proven to re-produce the issue on demand and the drift was non-existent to very minor.

It also seems that DJI fixed the braking response sensitivity issue that most were having where the drone was ignoring the sensitivity setting and braking at max braking effect no matter what. Now the drone seems to be responding to that setting and braking at more appropriate rates.

Thanks Brantel.  Doing the upgrade now

I question why DJI didn't officially release any notes on these forums concerning this update?

Oracle Miata Posted at 2018-6-27 09:49
I question why DJI didn't officially release any notes on these forums concerning this update?

They did but I think many people including me missed it at first:

https://forum.dji.com/thread-154139-1-1.html

DJI Natalia Posted at 2018-6-26 14:55
This actually correct. DJI just recently released the new firmware version of Phantom 4 Pro V2.0. Thank you for sharing it with our co-Pilot. Keep it up and enjoy flying!

Any new updates coming out soon for the P4A+

Suren Posted at 2018-6-27 11:04
Any new updates coming out soon for the P4A+

Hello. No updates as of the moment. This concern has been forwarded to our Developer Team. We will post on our DJI official website once we do have the new firmware for Phantom 4 Pro +. Thank you for your understanding.