Rinus
lvl.2
Flight distance : 39862 ft
Netherlands
Offline
|
Hi,
I have found some problems to get my GH4 Zenmuse to work. In the assistent software it seems to work, as i move the knob on the transmitter the sliders are moving, but the gimbal does nothing.
Here is my setup:
DJI S900
A2 flight controler
GH4 HD Zenmuse Gimbal
Panasonic GH4
Lightbride (only for video transmission)
Futaba T14SG
Flytrex Live 3G
The Futaba is bound to the A2 controler correctly. I see the sliders react in the A2 assistent software when i move the sticks on the transmitter
All part are using the latest updates. The gimbal is working normal, but there is no control over it.
The gimbal CGU is connected to the A2 on can-bus 2 port.
The F2 on the A2 is connected to the tilt on the gimbal GCU
The F3 on the A2 is connected to the mode on the gimbal GCU
The F4 on the A2 is connected to the shut on the gimbal GCU.
The channels of the transmitter are map to D2, D3, D4.
What do i have to do to get this to work. What am i missing here.
I want to use a single pilot solution with the Futaba T14SG. I only need to control the mode, tilt and shutter function on the gimbal and GH4.
|
|