jasonkav
lvl.1
Flight distance : 511627 ft
France
Offline
|
Mark The Droner Posted at 2018-7-6 02:28
That's a good question. All my P2 series motors are 2212 so I don't worry, but it depends on which motors you have. IIRC, if you have the 2212 motors, all the ESCs will work. If you have ESC v2.1, all the motors will work. But if you have the 2312 motors and you're looking to replace a bad ESC with a good used ESC, it gets complicated. If you buy a new ESC from somewhere, it will be a 2.1 so you have no worries, but the used ESCs that aren't marked are a concern with the 2312 motors. So in that case you should research it or just make sure you buy v2.1 ESCs. IIRC, the V2 ESCs will work with 2312 but the original V1 ESCs won't. But neither of those ESCs are marked. I think you have to find out via the serial number and DJI can tell you what version it is.
i replaced motors with 2312 version, I have an eye on a pair of v2.1
|
|