That's a good question. Right now I'm using a Sony CLM-FHD5 monitor via HDMI which works well outside. But a CrystalSky could be better. There are some pretty inexpensive equivalents to the Sony you might try.
djiuser_u1fioz8UrNqU Posted at 2018-7-10 15:50
That's a good question. Right now I'm using a Sony CLM-FHD5 monitor via HDMI which works well outside. But a CrystalSky could be better. There are some pretty inexpensive equivalents to the Sony you might try.
I appreciate the advice. but i have already have the crystalsky for my p4p. i am hoping i could use the monitor for both. im using a feelworld monitor right now. crystalsky would be better though. thanks!
Thanks for bringing this to our attention. This has been forwarded to our engineers for further review. Hope more features will be available in the future.
DJI Susan Posted at 2018-7-15 23:54
Thanks for bringing this to our attention. This has been forwarded to our engineers for further review. Hope more features will be available in the future.
That would be a really good thing if crystalsky and ronin-s worked together. Unfortunately, you can't see much on the normal monitors during an outdoor shoot. Greetings to the DJI engineers, they should do some magic for the Ronin-S with crystalsky together.
Surface2Air Posted at 2018-7-27 12:06
Having Crystalsky work with a camera on the gimbal is a no brainer. I’m almost sure they will implement it. If not soon then later down the line.
You forget that the CS doesn't have an HDMI input, it should have to be done via USB and that's easier said than done if doable at all.They could have done this for the bigger Ronins but they didn't so don't hold your breath.
Elettrone78 Posted at 2018-7-31 10:16
You forget that the CS doesn't have an HDMI input, it should have to be done via USB and that's easier said than done if doable at all.They could have done this for the bigger Ronins but they didn't so don't hold your breath.
When CS was launched there were a few posts from people saying DJI were working on some sort of dongle that would allow video in. I'm guessing it was shelved.
Following this subject with great interest, I have the ronin-s and crystalsky for my inspire 2, would be great to see it as a focus monitor on the ronin s