Have a Getterback, for the spark I picked up, looking at easy ways to attach when I need it....

ordered a battery clip,  like this _ https://www.ebay.com/itm/Anti-sl ... 2057872.m2749.l2649


and also ordered this landing gear set up _ https://www.ebay.com/itm/Extende ... 2057872.m2749.l2649



No for the use of either of those, but something I can cut/ attache the getterback to, and snap on and off when needed....  I figured some on here may have a link to, or know someone who can print things.  Something like the landing gear set up above, with no legs, and a bottom tab you can drill into and zip tie would be awesome.


Currnt plan is totry and mount it between the legs, and not block bottom camera..


also considered using a finger gaurd, and attached to that?  thoughts?  

Hi. Thank you for the inquiry. I do not recommend to customize the DJI Spark with 3rd party accessories. These can affect the performance of the DJI Spark while on a flight and might cause severe damage to the Drone in the future.

Well that's great and all but they don't float..... and my last Phantom is at the bottom of the Tennessee River because if a Factory DJI blade failure.... So I plan to attached a getterback to the drone and test it out for when I am taking pics of boats on the water.  and Looking for a simply snap on mount/ part to attach it if possible.

Damn River!!

I would like to find some who would print some
slip on stick extensions.

John

extensions for what?  

Control stick extensions for the Spark RC, since the Spark
does not have exponential.

https://www.polarprofilters.com/ ... ir-extension-sticks

DJI Stephen Posted at 2018-7-16 10:12
Hi. Thank you for the inquiry. I do not recommend to customize the DJI Spark with 3rd party accessories. These can affect the performance of the DJI Spark while on a flight and might cause severe damage to the Drone in the future.

So to be clear, DJI doe snot recommend using the battery clips?

I’m currently using a 3d printed battery lock with now problems

Me too, im using a great 3d printed battery lock. Im lovin it.

Mittens Posted at 2018-7-17 09:29
https://www.polarprofilters.com/products/mavic-air-extension-sticks

For Mavic Air RC - I don't see how these would work for the Spark RC.

Johnny C! Posted at 2018-7-17 08:15
Control stick extensions for the Spark RC, since the Spark
does not have exponential.

I was also looking for stick extensions, do yours work nicely? did you construct them yourself, or where did you find the instruction-file?

Mittens Posted at 2018-7-20 08:04
So to be clear, DJI doe snot recommend using the battery clips?

DJI should be providing the battery clip for free

My 3D printed clip has over 200 flights without issue.

I have a 3d printer and I always look for news for my spark. The battery latch I already printed was good, but I had the impression that it forces the drone's legs and I did not use it. What else I use is a prop protector and gimbal protector that I printed and use to keep the drone in the bag. From the list I saw, only the stick protectors that I never printed because I did not see it. Other than that I did not find many different things from what I posted here. But it was really only these

see my videos at: https://www.youtube.com/channel/UC8RM3Lgc7PGbkL2J7_sL6OQ

Sparkinator Posted at 2018-7-27 00:09
I was also looking for stick extensions, do yours work nicely? did you construct them yourself, or where did you find the instruction-file?

Standard size Sharpie marker caps fit the Spark RC sticks perfectly - slightly snug but you can easily push them on and pull them off. You can carefully cut the caps to the length you want (and also clip off the shirt pocket clip).

Great idea!  I'm going to buy two red or
orange markers for a good color in the
event that I drop them in tall grass etc.

John