Please select Into the mobile phone version | Continue to access the computer ver.
Impossible to use ND filters ?!
414 5 2018-7-31
Uploading and Loding Picture ...(0/1)
o(^-^)o
Sverker Hahn
lvl.1
Flight distance : 58658 ft
Sweden
Offline

Bought the PolaPro ND-filters for Mavic Air.

The problem is that I cannot remove the Bezel on the lens.

While I have seen videos of people taking off the ring with or without help of a rubber band, the ring on my Mavic is like glued to the lens.

How difficult should it be?

The lens and gimbal seem too be so delicate that I fear that I will break something ...

Regards

Sverker
sverker@kudu.se
2018-7-31
Use props
msinger
Captain
Flight distance : 183694 ft
  • >>>
United States
Offline

Try following these tips.
2018-7-31
Use props
Wachtberger
Captain
Flight distance : 261509 ft
Offline

Yes, it's a challenge but will work at the end. The method posted by msinger here above has worked well for many, for me a rubber band did it after many tries. You need some patience and you need to hold the gimbal well when trying to remove the ring.
2018-8-1
Use props
Sverker Hahn
lvl.1
Flight distance : 58658 ft
Sweden
Offline

How much patience?
How many tries?

It still sits like glued.

2018-8-2
Use props
beab9876
New

India
Offline

I was also facing the same problem to not able to remove the Bezel on the lens but then I asked on  Apple Customer Service  after that my issue resolved. So, if anyone facing the exact problem you can also check here.
2018-8-2
Use props
Sverker Hahn
lvl.1
Flight distance : 58658 ft
Sweden
Offline

beab9876 Posted at 2018-8-2 16:23
I was also facing the same problem to not able to remove the Bezel on the lens but then I asked on  Apple Customer Service  after that my issue resolved. So, if anyone facing the exact problem you can also check here.

And what advice did Apple have to this Mavic Air problem.
I am really interested.
2018-8-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules