Please select Into the mobile phone version | Continue to access the computer ver.
Any recommendations for stand-by or turned of state
248 1 2018-8-2
Uploading and Loding Picture ...(0/1)
o(^-^)o
han360
lvl.1
Austria
Offline

Hi,

are there any recommendations how to keep the Ronin-S when its turned off?


The Ronin-S is stabilized with my camera without the lens-cover on. When I turn everything off, I normaly put the lens-cover back on my camera, so its getting unbalanced and tilts forward and the lens of the camera is facing the ground.
I am wondering if its good for the motors to stay at this position while its turned off, should I remove the camera from the Ronin-S while it is turned off or is it ok to keep it properly balanced, means I have to rebalance it with the lens-cover on, which is less troublesome than attaching and detaching the whole camera everytime when I decide to turn the Ronin-S off.

Thanks.


2018-8-2
Use props
constmachi
lvl.1
Canada
Offline

The motor isn't running when it's turned off so it doesn't really matter what position it's in. I wouldn't worry about it.
2018-8-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules