Hi!

Crashed my mavic pro straight into the ground while in sports mode.

I 'fixed it' as such:
- dissembled the whole thing
- identified damage
- replaced the vibration plate (the clip on the original one had snapped off)
- replaced the gimbal/camera assembly ribbon (the original ribbon had been torn)
- check everything else was ok (it was)

Rebuilt, restarted, calibrated against the DJI assistant software (the one where you point the drone at your screen etc) - all successful and without problem.

However, thought i'd do a second calibration using the mobile software this time, just to be sure, and it failed at 28% then the gimball started thrashing violently.

I've then tried calibrating the IMU , which worked but made no difference to the gimball.

To the pros out there... what do you think it means? i suspect the ribbon replacement wasn't as good as i hoped, but since it worked well for 5 minutes, i wonder what is causing it! thank you!

Hello there. We apologize for the inconvenience. We highly suggest to send it to our repair facility to have it check. You may start a case online: https://repair.dji.com