What is the procedure for fitting the little usb cable to the controller? It came with an iPhone one fitted which I have removed and need to fit the USB C one. There is a little rectangular insert that looks like it should go into the side of the controller for the usb plug to sit in but I cant get it in and I dont want to break anything.
Any instructions appreciated.

This might be what you need-
https://www.amazon.com/Apple-Mic ... o+Lightning+adapter

Kingram Posted at 2018-8-12 17:09
This might be what you need-
https://www.amazon.com/Apple-Micro-Lightning-adapter-MD820AM/dp/B00WVDGSKU/ref=sr_1_3?ie=UTF8&qid=1534122460&sr=8-3&keywords=Apple+Micro+USB+to+Lightning+adapter

Thanks. I have the cable and the insert, its just that I am not sure how the insert slider thing is supposed ro attach to the side of the controller, do you just push it in?

Yes, Just push it in.

GDL Posted at 2018-8-12 17:15
Yes, Just push it in.

Thanks, got it in. I didnt want to break anything before I had a chance to fly it
Now to wait patiently while the batteries charge.

Take your time and control all the settings before start to fly and even in a open space! Successsss!

I prefer to use a stronger cable plugged into the bottom USB socket (removing the side one). Some also find it easier to use the small side cable without the plastic slider.

Personally, i found that little sliding thing a problem. It always pops right back out if i try to connect my phone. I removed it totally. I also use the bottom usb for the phone, and the top one with a power-bank to charge the rc if I plan to take a couple of batteries and my phone is not fully charged. Works a charm.