Please select Into the mobile phone version | Continue to access the computer ver.
Camera Hanging str8 down
509 2 2015-5-26
Uploading and Loding Picture ...(0/1)
o(^-^)o
jack1144
lvl.4

Canada
Offline

Just got the Phantom3 Profeesional.
While unpacking I noticed the usual... gimbal clamp was off. I see this was due to the foam block preventing it from entering the little guide in the gimbal.
After removing the foam, it fits fine.
The camera though is hanging straight down and seems there is no resistance in the pivot.
( It moves freely) Is it normal to hang down with the gimbal clamp off?
Hey thanks for the help. I'm newbie and being cautious.

2015-5-26
Use props
carlcronejr
lvl.1
United States
Offline

It hangs loosely until you power it up and it snaps into place.
2015-5-26
Use props
jack1144
lvl.4

Canada
Offline

Awesome, thanks for the quick response.
2015-5-26
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules