Dear Wise–Members (and hopefully DJI–Staff)!

Owning an loving an used P3A (W322) – now my Remote (GL300A) starts having some USB–Port issues.
I would like to buy a new (used) controller, but actually only GL300B/C on the market....will they work/pair with my old W322? (because of the Davinci–Chipset and so on...)

Thank you in Advance!

This chart shows all of the remote controllers that are compatible with the P3A:

Yes, either of those will work just fine. I still have an "OLD" P3A....Ha-Ha, and it works great!

msinger Posted at 2018-8-21 16:05
This chart shows all of the remote controllers that are compatible with the P3A:

[view_image]

Thank you very much!

Hi there, I appreciate your time bringing this query to us. Remote controllers of the Phantom 3 Professional (GL300B) and Phantom 3 Advanced (GL300A) can be exchanged with each other. Which means you may use the GL300B to your W322 aircraft. Should you have further question, please let us know. Thank you.

My Pro has a G 300C.
My advanced came with an A, same issue. Not connecting to the tablet, but flys. Bought a B on the local trading site for $40. Now have two controllers that won't connect. Plus the C won't connect because the gimbal won't take a firmware update... I  have a reconditioned Pro that flys great.
What are your thought's on the bad USB? Is it the board, or the flat ribbon from the board to the main board in the radio?

The chart above confuses me....I have a P4a which works with a GL300C.   Which doesn’t say ver.B on it...but still controls the a/c ...?

Trampintransit Posted at 11-8 14:18
The chart above confuses me....I have a P4a which works with a GL300C.   Which doesn’t say ver.B on it...but still controls the a/c ...?

Look at the modes in the chart and compare.