BigPayday35
New
United States
Offline
|
ISSUE RESOLVED!
This is the "end-all-be-all" solution to this matter. It's frustrating when you're trying to figure out the fix, and there's a bunch of nonsense solutions and repetitive questions in this thread.
So i'm hoping this information will help someone out, because none of the solutions previous to this one did anything for me.
I almost went crazy trying to figure out why neither my Macbook Pro or PC tower wasn't connecting, but the answer is your cable.
Don't use the USB-C to USB-A cable that came with the Ronin-S.
Get yourself a robust cable, and in case you aren't aware, not all cables are created equal.
So basically follow the steps, only difference will be use a better quality cable.
1) Download the correct software: DJI Assistant Pro for Ronin.
2) Run software and input your login info.
3) Power the battery on the gimbal (although I don't think you need to).
4) Use an appropriate cable that will transfer adequate power/data from gimbal to computer.
I used a USB-C to USB-C cable with USB-A adapter tip for my Mac USB-A port (older model).
I knew this cable would work because I normally use it to power up a RAID storage unit I have.
5) Once you connect the cable, the Assistant Pro should bring up the Ronin Icon, and Voila!
Your Welcome ;)
|
|