horizon on the return video was not level
873 9 2018-8-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
chichid
lvl.2
Flight distance : 3675 ft
France
Offline

Hello,  I made some pictures with my inspire 2, and I found on the rushes that the horizon on the return video was not level, he leaned. There was some wind on the day of the shots, but not much. I used the Olympus Zuico 45 mm lens with a variable filter. The basket was normally well balanced. A solution of settings exists to have a balanced level of the image. Thank you!Best regards, R.Houanoh
2018-8-27
Use props
MRTN.photo
lvl.2
Flight distance : 1395259 ft
  • >>>
Offline

Yeah, I noticed similar issues, not sure this is wind related as it happened also under average conditions. Especially when you turn the gimbal it will become rather obvious. I've no idea where this came from, I didn't notice it before the update with the POI...
2018-8-27
Use props
Rodger8
First Officer
Flight distance : 20145135 ft
  • >>>
United States
Offline

I have the same issue with the same lens doing still shots. I am going to try a gimbal calibration.
2018-8-27
Use props
DJI Wanda
Administrator
Offline

Hi. We apologize for the inconvenience. Did you try to calibrate the gimbal?
2018-8-27
Use props
chichid
lvl.2
Flight distance : 3675 ft
Offline

No change after calibrating the gimbal and the IMU...
2018-8-29
Use props
DJI Wanda
Administrator
Offline

chichid Posted at 2018-8-29 03:39
No change after calibrating the gimbal and the IMU...

Do you have a sample photo showing the problem?
2018-8-29
Use props
chichid
lvl.2
Flight distance : 3675 ft
Offline

2018-8-29
Use props
DJI Wanda
Administrator
Offline


May I know what camera are you using? Did you also installed a balancing ring?
2018-8-29
Use props
chichid
lvl.2
Flight distance : 3675 ft
Offline

I used a compatible Olympus 45mm zuico well balanced with a filter Gobe, as recommended
2018-8-29
Use props
DJI Wanda
Administrator
Offline

chichid Posted at 2018-8-29 07:32
I used a compatible Olympus 45mm zuico well balanced with a filter Gobe, as recommended

I see. If that's the case, we highly suggest to send it to our repair facility to have it check. You may start up a case online: repair.dji.com or send an email to support.nl@dji.com.
2018-8-30
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules