Please select Into the mobile phone version | Continue to access the computer ver.
Master and slave remote
794 6 2018-9-1
Uploading and Loding Picture ...(0/1)
o(^-^)o
Aerial Survey & Productions
Second Officer
Flight distance : 106483 ft
Offline

I have an Inspire 1 with 2 remotes. One is set up as master the other one as slave.
However I haven't been using the slave RC for quite a while. The master RC on the other hand has been used a lot. One of the antennas is a bit lose and I get the idea that the battery is not that good anymore.,Therefor I would like to switch the remotes. Making the master RC the slave RC and visa versa in the new set up. However I'n not quite sure how to do this. Anybody who has done this before ?
2018-9-1
Use props
DJI Wanda
Administrator
Offline

Hi. Thank you for reaching DJI Forum. Yes, that is possible to interchange 2 remote controllers of Inspire 1.
2018-9-2
Use props
Aerial Survey & Productions
Second Officer
Flight distance : 106483 ft
Offline

Is there a standard procedure to do this ?
2018-9-2
Use props
Mark Guille
Captain
Flight distance : 2031818 ft
Guernsey
Offline

Aerial Survey & Productions Posted at 2018-9-2 07:15
Is there a standard procedure to do this ?

Take a look in your RC settings in your GO APP.
2018-9-2
Use props
DJI Wanda
Administrator
Offline

Aerial Survey & Productions Posted at 2018-9-2 07:15
Is there a standard procedure to do this ?

You may refer to this one:
2018-9-2
Use props
Aerial Survey & Productions
Second Officer
Flight distance : 106483 ft
Offline

Thnx Wanda I'll look in to it.
2018-9-2
Use props
Aerial Survey & Productions
Second Officer
Flight distance : 106483 ft
Offline

And Thnx Mark
2018-9-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules