I cannot seem to solve the compass error on my Spark.  

I was having issues with calibrating before flight and finally got it to calibrate, then relized there were steel spikes in the railroad ties I was launchiung from. I cannpt seem to fix the compass error now.  It won't go back into calibration mode.  Any ideas??



Thank you
Brian

You can start the compass calibration in the following section of DJI GO:

Hi there. Sorry for the inconvenience and trouble caused. Please make sure that there's no magnetic interference when calibrating your compass. If you still having the same problem, please try to change location and try to calibrate your gimbal again. Thank you.

DJI Natalia Posted at 2018-9-15 11:44
Hi there. Sorry for the inconvenience and trouble caused. Please make sure that there's no magnetic interference when calibrating your compass. If you still having the same problem, please try to change location and try to calibrate your gimbal again. Thank you.

This was actually no help what so ever!  I don't think you even read my post!   Totally scripted!

msinger Posted at 2018-9-15 09:54
You can start the compass calibration in the following section of DJI GO:

[view_image]

This solved the issue!  Thank you so much!!!  

Twistedlarch Posted at 2018-9-15 17:59
This was actually no help what so ever!  I don't think you even read my post!   Totally scripted!

Great that members of this Forum can provide good information to assist us,, (just not sure about the rest)

Flighty Posted at 2018-9-15 22:23
Great that members of this Forum can provide good information to assist us,, (just not sure about the rest)

Bots, and automated answers.  

Joller79 DK Posted at 2018-9-15 22:32
Bots, and automated answers.

Not robots, but pre-written response templates. (Ctrl + c, Ctrl + v)

Jakab Gipsz Posted at 2018-9-16 06:08
Not robots, but pre-written response templates. (Ctrl + c, Ctrl + v)

Yeah.. I know.. Otherwise they could write stuff, that would make people sew them...

Twistedlarch Posted at 2018-9-15 17:59
This was actually no help what so ever!  I don't think you even read my post!   Totally scripted!

Hi, Sorry for the inconvenience. I think DJI Natalia means that you have to ensure the environment if it's good during the compass calibration so that it will not be interrupted while doing this, however, we're glad that the issue has been sorted. Please let us know if you have other concern. Thank you for understanding.