Hi.

Just bought the Inspire 2 Prof combo including two remotes. A Cendence and the normal Inspire 2 remote. Wich on
is recommended to use as the master and wich one to use as slave?

I would use the Cendence as the master and the regular remote as the slave, thats my opinion

BagoDJIoperator84 Posted at 2018-9-15 15:11
I would use the Cendence as the master and the regular remote as the slave, thats my opinion

Thanks for your reply..
That’s also what makes most sense to me, but the focus handwheel that is a part of the combo is shipped with a holder only for Cendence and not the regular radio
Isn’t it meant to be used together with the remote controlling the camera?

FarmerMac Posted at 2018-9-15 21:58
Thanks for your reply..
That’s also what makes most sense to me, but the focus handwheel that is a part of the combo is shipped with a holder only for Cendence and not the regular radio
Isn’t it meant to be used together with the remote controlling the camera?

It all depends on how are you going to employ this system. For 2 person operation in filming I'll set the Cendence as a slave, since this device is providing advanced camera controlling features, precise focusing/zooming with Focus Wheel 2 included. Standard RC is more than enough to reliably pilot the aircraft in master mode.

Unless things have changed, the standard remote will not work as a slave with the Cendence rc.

things must have changed. It works ;) In between fw updates at least

goldrock Posted at 2018-9-16 05:55
things must have changed. It works ;) In between fw updates at least

updates are one thing, pairing is another. Really don't know other than in the beginning the supplied RC would not mate to the Cendence.

Rodger8 Posted at 2018-9-16 15:40
updates are one thing, pairing is another. Really don't know other than in the beginning the supplied RC would not mate to the Cendence.

true. Sounds like a firmware mismatch. Try upgrading/dowmgrading the RC