Please select Into the mobile phone version | Continue to access the computer ver.
New firmware is available? No, not really ...
942 14 2018-9-22
Uploading and Loding Picture ...(0/1)
o(^-^)o
Matthew Dobrski
Captain
  • >>>
Offline

Recently (Sep 22/2018), after checking with DJI servers, Go 4 app is displaying red banner with information that "New firmware is available! (Inspire 2 01.02.0200)". Why? Isn't the same bugged firmware version which is causing reported issues with IMU, landing gear and hovering stability? Or - in contrary - is this update fault-free and all this confusing buzz is nothing but a myth, created by some anonymous idiots Internet is full of?
DJI Go 4 app is stubbornly requiring firmware update. Should we proceed or not?  

EDIT: Requirement to update appears only when the device (CS in this case) is within my home WiFi range. Beyond that (generic WLAN displayed) Overall Aircraft Status reports Latest Firmware (.0100) as normal, no warnings. Go figure ...



2018-9-22
Use props
BIGDZ
Captain
Flight distance : 2220722 ft
  • >>>
Offline

I went back to .100 bc .200 before today sucked! but I have to agree, why call this “.200” it the previous .200 was bad. Confusing indeed. I’ll stay where I’m at, till I know this new update is safe.
2018-9-22
Use props
Blackwood
Second Officer

United States
Offline

According to the DJi website, the version of .200 released on July 18th is still the latest version.
2018-9-22
Use props
Rob W
Captain
Flight distance : 75413 ft
  • >>>
Sweden
Offline

There is a firmware .201, but you have to ask to get it. That is essentially firmware .100 with ProRes for X7. I haven't up/downgraded to it yet, so I don't know if it adds ProRes for X5. I don't know if that firmware also have FAT32 for the SSD.
The .200 IS buggy, confirmed buggy by DJI.

-- Sorry for any confusion, I should have written "you have do ask DJI to get it". --
2018-9-23
Use props
Matthew Dobrski
Captain
  • >>>
Offline

Rob W Posted at 2018-9-23 21:20
There is a firmware .201, but you have to ask to get it. That is essentially firmware .100 with ProRes for X7. I haven't up/downgraded to it yet, so I don't know if it adds ProRes for X5. I don't know if that firmware also have FAT32 for the SSD.
The .200 IS buggy, confirmed buggy by DJI.

"There is a firmware .201, but you have to ask to get it."

What ???! Ask who ???! Where ???! Why ???! What it takes to get such priviledge ??????? How far this madness will go ...
2018-9-23
Use props
jdmagoo
Second Officer
Flight distance : 1229554 ft
  • >>>
Australia
Offline

Ask Ken Booth otherwise known as blade strike on the RC Groups forum, he will get you the new firmware. I guess DJI internally have thought it may take a while to fix all the issues of the .200 release, so those who require PRR now can get it. Makes sense  but they should advertise the fact and not let it to hearsay for people to find out.
2018-9-23
Use props
Matthew Dobrski
Captain
  • >>>
Offline

jdmagoo Posted at 2018-9-23 23:00
Ask Ken Booth otherwise known as blade strike on the RC Groups forum, he will get you the new firmware. I guess DJI internally have thought it may take a while to fix all the issues of the .200 release, so those who require PRR now can get it. Makes sense  but they should advertise the fact and not let it to hearsay for people to find out.

Thank you for clarification ...
2018-9-23
Use props
DJI Wanda
Administrator

Offline

Hi. We apologize for the confusion. As of now, the latest firmware for Inspire 2 is V01.02.0200 which has a known bug issue that our engineers are currently working on. Another reason why we recommend customers to revert back to the old firmware which is V01.02.0100.
2018-9-23
Use props
FarmerMac
First Officer
Flight distance : 678802 ft
  • >>>
Denmark
Offline

DJI Wanda Posted at 2018-9-23 23:54
Hi. We apologize for the confusion. As of now, the latest firmware for Inspire 2 is V01.02.0200 which has a known bug issue that our engineers are currently working on. Another reason why we recommend customers to revert back to the old firmware which is V01.02.0100.

But what about .0201 that Rob W mentioned in post #4?
2018-9-24
Use props
Rob W
Captain
Flight distance : 75413 ft
  • >>>
Sweden
Offline

Matthew Dobrski Posted at 2018-9-23 22:40
"There is a firmware .201, but you have to ask to get it."

What ???! Ask who ???! Where ???! Why ???! What it takes to get such priviledge ??????? How far this madness will go ...

Sorry for any confusion, I should have written "you have do ask DJI to get it

See jdmagoo's post.
2018-9-24
Use props
Rob W
Captain
Flight distance : 75413 ft
  • >>>
Sweden
Offline

jdmagoo Posted at 2018-9-23 23:00
Ask Ken Booth otherwise known as blade strike on the RC Groups forum, he will get you the new firmware. I guess DJI internally have thought it may take a while to fix all the issues of the .200 release, so those who require PRR now can get it. Makes sense  but they should advertise the fact and not let it to hearsay for people to find out.

Agreed about what you wrote about hear-say. DJI should communicate it publicly and clearly on their homepage under Downloads, as well as here on their OWN forum.

But I'm glad we at least can get some help on another forum, but it is sad we can't get it on DJI's own forum where most probably will go to get info about their DJI product.
2018-9-24
Use props
Denis SF
lvl.3
Flight distance : 274429 ft
  • >>>
France
Offline

Hello DJI,

Are you still on the issues of updates? We still have no news?
2018-9-24
Use props
SEK-JOE
lvl.3
Flight distance : 1032215 ft
United States
Offline

Wanda does this firmware exist?  If so can I get it?  
2018-9-24
Use props
Matthew Dobrski
Captain
  • >>>
Offline

DJI Wanda Posted at 2018-9-23 23:54
Hi. We apologize for the confusion. As of now, the latest firmware for Inspire 2 is V01.02.0200 which has a known bug issue that our engineers are currently working on. Another reason why we recommend customers to revert back to the old firmware which is V01.02.0100.

Wanda, you continue to Copy & Paste the same reply since 0200 FW release months ago. Why are you doing this? Damaged 0200 is still available and officially recommended for installation. Why?
2018-9-24
Use props
FVP
Second Officer
France
Offline

The Inspire2's firmware story is crazy. How Dji can manage a "Pro" drone like this ? Firmware after firmware we discover a lot of bug.

Dji is not professional.
2018-9-27
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules