Hi there!

i bought a tattu lipo 12000 mah 6s and i already habe a imax b6AC charger and im wondering if i can charge it with my charger.

thank you very much
pixtep





charger tech spec:
Input Voltage: 11~18v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Discharge current range: .1~1.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v

Yes you can use it will take a while though,might want to upgrade your charger!!

maloneshaun@roc Posted at 2015-6-2 01:13
Yes you can use it will take a while though,might want to upgrade your charger!!

and with which settings?6s and on how many A? this charges goes till 5A

Use the full 5 amps,still will take about two hours or more to charge

maloneshaun@roc Posted at 2015-6-2 14:11
Use the full 5 amps,still will take about two hours or more to charge

B6AC Max Charge 50W. With LiPo 6s at the maximum 2 / 2.2A.
You have to take a charger more than 150 watts per load to 6A or 300Watts to load to 12A.

Recharge a 6S LiPo 12000mAh with B6AC requires not less than 6 hours.

Watt = Volts x Ampere

maloneshaun@roc Posted at 2015-6-2 01:13
Yes you can use it will take a while though,might want to upgrade your charger!!

Any recommendations or suggestions on a quality charger that will suit 6S  22000mAh Lipo Battery