Krrisstoff
Captain
Flight distance : 1725610 ft
Poland
Offline
|
Ben Mason Posted at 2018-10-22 07:51
1. Check your controller in the calibration screen(while the drone is off), see if the rudder stick is giving commands on its own.
2. Your in a pretty tight space there, try another flight in an open space see if it does the same, I assume your front and back sensors are on and trying to avoid an obstacle.
3. Check that you have the latest firmware on your drone and controller.
Thanks for the answer. As I said, I have the latest soft in the drone and controller. I have already refreshed the soft by dji assistant, made calibrations of cameras, sensors. I also calibrated the rods, IMU and compass.
During the flight, I have activated proximity sensors and bypassing.
This does not occur always but quite often. This is especially problematic when I take pictures and the drone turns itself. |
|