Just found out the the Crystalsky video live feed is only 720p when using a Mavic 2 pro, the big screen has an resolution of 2048x1536m so why not full hd 1080p, the Mavic 2 pro supports it.

DJI support confirmed it is 780p, they do not know if this wil be changed to 1080p in the near future.

Hi Ron, after updating the DJI GO 4 for CrystalSky to V4.3.0, it will work with Mavic 2, but does not support 1080P for now. Should there is an update, we'll release on our website, thanks for your support and attention.

Thanks for the info!

DJI Susan Posted at 2018-10-27 01:49
Hi Ron, after updating the DJI GO 4 for CrystalSky to V4.3.0, it will work with Mavic 2, but does not support 1080P for now. Should there is an update, we'll release on our website, thanks for your support and attention.

Hi DJI Susan,

I know the CrystalSky works with the Mavic 2 , love this combination use it every week. However 1080p would be nice especially when using the CrystalSky for edit and/or upload.

Ron Baltus Posted at 2018-10-29 00:16
Hi DJI Susan,

I know the CrystalSky works with the Mavic 2 , love this combination use it every week. However 1080p would be nice especially when using the CrystalSky for edit and/or upload.

Thanks for getting back to us. This will be forwarded to our engineers, hope they can consider it in the future.

Ron Baltus Posted at 10-29 00:16
Hi DJI Susan,

I know the CrystalSky works with the Mavic 2 , love this combination use it every week. However 1080p would be nice especially when using the CrystalSky for edit and/or upload.

Hi Ron, sorry for keeping you waiting. We just got an update from our engineers that 1080P is not available for CrystalSky due to the hardware limitation. Sorry for this.

I hope new CrystalSky 2 has better hardware to support 1080P live feed, playback H265 10bit video & do screen recording.

dv8ed Posted at 2018-11-12 09:27
I hope new CrystalSky 2 has better hardware to support 1080P live feed, playback H265 10bit video & do screen recording.

Hi,

found some infos on this, here aggregated rumors:
"By separating the screen part from DJI Smart RC, you will have your own CrystalSky 2, 2 times faster than the original CrystalSky. Looks like its CPU has been upgraded. Antutu benchmark of CrystalSky is 55000, this new RC is 106220. Still lower than most of smartphones."
"Tech spec of upcoming CrystalSky 2 is now crystal clear. CPU: RockChips RK3399 hexa core A53 at 1.8GHz in 64-bit GPU: ARM Mali-T864 RAM: 4GB LPDDR4 Screen: same as original CrystalSky, with Rec.2020 support. Wireless connection: 802.11b/g/n/ac and Bluetooth (new)"
"Other spec: 1080p video transmission decoder 4K H.264/H.265/VP8/VP9 decoder HDMI 2.0 up to 4K 60p USB 3.0 & USB-C dual Micro SD slot Active heat dissipation and self-heating 7.4V Li-Po battery Microphone array"
Source: https://twitter.com/ositalv

For now after flying you need to download the originals to replace the 720p live stream... and that's only if you record in 1080p and not 4K... if you're recording above 1080p than you can't download that into the CrappySky.

CrystalSky 2... NAH PASS learned my lesson with CS 1...

DJI Susan Posted at 2018-11-5 23:37
Hi Ron, sorry for keeping you waiting. We just got an update from our engineers that 1080P is not available for CrystalSky due to the hardware limitation. Sorry for this.

Hi,
I have recently bought mavic 2 pro & I have a Panasonic hmx100 video mixer to which I Need 720p output from the drone. Pls help me how to get that feed. The video resolutions available in mavic 2 pro doesn’t have 720p. Thank you in advance