Justin Lovell
lvl.1
Canada
Offline
|
Issue:
1. Ronin 2 motors will not respond.
2. Happened soon after 'binding' the remote to the ronin 2.
3. Have tried to upgrade and downgrade the firmware multiple times on multiple pc/mac systems and using multiple cables. It fails every time. Getting multiple errors - constantly "the pitch device is not connected!"
4. Tried reseating the batteries, swapping batteries, reseating the sled, running using the battery power cable to the sled.
See attached link for photos of some of the errors.
https://photos.app.goo.gl/dEMB9S23xrmpNFMb8
Sent this to tech support:
Subject: Motors not responding Message: Hey Guys, Major problem on set. We had to pull out our Ronin 1 to replace the Ronin 2 and now in big trouble with production. We setup the r2, attempted to bind the remote, and then the motors all went limp. Binding failed and now the ronin is dead and not responding. We also clicked on the "Logs" option. That's all that we've done and now it is not responding. Tried to refresh the firmware on the r2 (1.03) but i get the error "0401 pitch device not connected". If i go into the monitor menu I have errors on Aircraft, remote controller, d.bus receiver but green on power hub. Any idea what we can do? Attempting to roll back to a previous firmware. Thank you!
|
|