Please select Into the mobile phone version | Continue to access the computer ver.
Ronin M Tilt axis not leveled
555 3 2018-10-26
Uploading and Loding Picture ...(0/1)
o(^-^)o
PhilippN
lvl.1

Czechia
Offline

Hello,
after I turn my (perfectly balanced) Ronin M on, the tilt axis gets balanced well at first, but then it slowly aims downwards by a few degrees. Then its stuck to this wrong level. When I turn SmoothTrack Tilt axis off and restart, the problem disappears. But as soon as I turn the smoothtrack function (for tilt axis) back on, it always drives the tilt motor down after a sec and it never aims forward then.
Also the pan axis in default settings aims a little to left.

Firmware update did not help, neither did default settings reset or recallibration on horizontal leveled surface.

Any help? Is it an error and a reason to return the ronin to my vendor?

Thanks.
2018-10-26
Use props
DJI Susan
Administrator

Offline

Hi PhilippN, we're sorry to read your post. May I know what's the current version of the unit? Could you upload a short video of your operation? We'd like to check the exact status and see whether we can help.
2018-10-27
Use props
Property Pilots
lvl.2
Flight distance : 277267 ft
New Zealand
Offline

My Ronin-M also does the same.
I have had this unit from new, and only a few weeks ago it started to "droop" ruining my shoots as verticals are essential in Real Estate Videos.
I have attached a link to a video I've just done to show what happens. I re-start the Ronin-M twice and its very apparent on the second start up.Ronin-M drooping video
hope you can shed some light.
I've recalibrated, re entered, re set to factory default..... still it droops slightly.
Model of Ronin-M is RM-6
2019-7-9
Use props
Property Pilots
lvl.2
Flight distance : 277267 ft
New Zealand
Offline

Ronin-M droop video
2019-7-9
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules