screcon
lvl.2
Flight distance : 816037 ft
United States
Offline
|
Fairly recent phenomenon - last 4 weeks?
Z30 on an M210 attached either in port 1 alone or port 2 with an X4S in port 1. The Z30 initializes at startup and keeps spinning left, then right. It stops at a cycle for 2-3 seconds, squeals a second, then starts initializing again. It will go on forever if I don't power things down.
In the Crystal Sky, either Pilot or DJIGo4, M10 FW is 01.01.0913.
Z30 FW shows 1.00.00.60 -- but the FW filename is 1.00.00.47 . . .
I have tried reformatting the 16GB SD card that has been working successfully in the Z30, and adding the 1/22/2018 FW 1.00.00.47 as the only file on the root of the SD card, then starting the M210 and waiting for Z30 FW to complete. Checking the TXT file on the SD card it says
"[ 5.285318] <<<==== INTO SD CARD UPDATE CHECK MODE upgrade ====>>>
[ 5.252432] <<<==== INTO SD CARD UPDATE CHECK MODE upgrade ====>>>"
Not successful.
We have also tried refreshing the M210 firmware. No change.
Please provide a solution.
|
|