Has anyone figured out how make live view full screen without black bars on left and right side?

I would like to use all screen space since my Samsung Galaxy S9+ is only 6.2"

What happen if you slide one finger down the screen?

I still want telemetry info just want screen to expand left & right so I don’t see those black bars.

Hi, thanks for the inquiry. We will check your query to our team if our app could possibly expand the live view on your mobile device. Thank you for the support.

That’s strange. I don’t get these black bars, but then again I have a spark and a mavic 1

Fly safely
Alex

Alex B. Posted at 2018-10-30 14:05
That’s strange. I don’t get these black bars, but then again I have a spark and a mavic 1

Fly safely

Go app detects if you have device with thin bezels so you can clamp RC arms thus black bars. I actually don't clamp it in deep so I don't cover light sensor. Auto brightness Galaxy S9+ can get very bright that's why I don't want to cover light sensor.

dv8ed Posted at 2018-10-29 21:13
I still want telemetry info just want screen to expand left & right so I don’t see those black bars.

Is it on PAL format. Might change if you use that.

G_Sig Posted at 2018-10-30 16:04
Is it on PAL format. Might change if you use that.

No I'm USA NTSC

dv8ed Posted at 2018-10-30 16:57
No I'm USA NTSC

Yes normally I use NTSC but if I change to PAL it change the screen on my Samsung S7.
It make the screen wider.

G_Sig Posted at 2018-10-30 17:03
Yes normally I use NTSC but if I change to PAL it change the screen on my Samsung S7.
It make the screen wider.

Looked every where no NTSC/PAL selection. I remember seeing it on my Inspire a few years ago.

My iPad Mini 4, iPhone 7 those have big bezels so OSD live view does go full screen.

iPhone X, XS Max, Galaxy S8/S9 has those black bars.

dv8ed Posted at 2018-10-30 19:10
Looked every where no NTSC/PAL selection. I remember seeing it on my Inspire a few years ago.

My iPad Mini 4, iPhone 7 those have big bezels so OSD live view does go full screen.

Its under pictures settings but stored in drone so it has to bee connected to change.

G_Sig Posted at 2018-10-30 23:05
Its under pictures settings but stored in drone so it has to bee connected to change.

Could not find it in Go 4 app but I did find it in DJI Pilot app. I chose PAL still didn’t work.

dv8ed Posted at 10-31 19:59
Could not find it in Go 4 app but I did find it in DJI Pilot app. I chose PAL still didn’t work.

You should also look at your display. I use Amoled Cinema and FHD 1920 x 1080,
if that settings is still in S9 you should use it for Dji.

I changed from Adaptive to Amoled Cinema, my screen is at FHD still no PAL. I don't think Mavic 2 has NTSC/PAL option baked into firmware. You're AC is Phantom?

My screen was full side to side and then I was playing around with the App and don't know what I did, so now my screen is with the sides black