What’s New? Shutter speed increased up to two seconds for https://l.facebook.com/l.php?u=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DUAMRolXmD5Q%26fbclid%3DIwAR1NLqUy5IDUwxGj-3dRLhIw-QknJkUTa_ErOVnHpn2rewmxGMgkiDGvC24&h=AT2RUydGulFeQuwg-Yj4PGoa10PkKxFND0ttqevZ81AiFiW1ZRcGItLeOtgQJPca-KrFjoAOZ1Dmvq4MWid9BUxTHAHtiDUPVPlGH_pEyINEyiqfjvsdxSuuCZ1p9sYdJeB2WzNAGsQ Circle and Course Lock (requires DJI GO 4 v4.3.4 or later). Added Task Library to Hyperlapse Waypoint (requires DJI GO 4 v4.3.4 or later). Added Precision Landing. Enabled Lateral Vision Systems for Point of Interest 2.0 (see Mavic 2 Pro/Zoom User Manual for more details about obstacle sensing requirements). Added voice alert for ActiveTrack 2.0 when the subject is lost (requires DJI GO 4 v4.3.4 or later for iOS. Android version is coming soon). Added on-screen display when shooting in Hyperlapse and Panorama (requires DJI GO 4 v4.3.4 or later). Optimized the Vision Systems status display in DJI GO 4 (requires DJI GO 4 v4.3.4 or later). verview Date: 2018.11.22 Aircraft Firmware: v01.00.02.00 DJI GO 4 App iOS: v4.3.5 DJI GO 4 App   Android: v4.3.4

Great... a lot of good improvments

What is "Added Task Library to Hyperlapse Waypoint (requires DJI GO 4 v4.3.4 or later)."?

Hi, we do appreciate sharing this latest firmware to our co-pilots. Fly safely.

great, now remain correct moire effect, horrizon curve (actulay reapir only by softare) side sensor for any mode not only automatic, and last why in mavic is not possibel to force atti maual (very useful to work in same situation)

great news!

Thanks for sharing! I'm going to go grab my M2P now and give it a go.

Well a lot more than was in the package when we first purchased, I’m sure many will be happy, hopefully everyone will not have to many problems installing or flying with new FW.

Thanks for the post.

I have noticed that on the DJI Crystal Sky (updated to the latest DJI GO4 App) there is not an option for the Precision Landing feature and the task library in waypoints will not save a flight. I have not tried on my Galaxy S7 yet to see if the bug is with CS or the app. I plan on testing again later today and will post my results here

cinnabun Posted at 11-22 07:41
I have noticed that on the DJI Crystal Sky (updated to the latest DJI GO4 App) there is not an option for the Precision Landing feature and the task library in waypoints will not save a flight. I have not tried on my Galaxy S7 yet to see if the bug is with CS or the app. I plan on testing again later today and will post my results here

(requires DJI GO 4 v4.3.4 or later)

So I imagine it may have to wait for app update.

cinnabun Posted at 11-22 07:41
I have noticed that on the DJI Crystal Sky (updated to the latest DJI GO4 App) there is not an option for the Precision Landing feature and the task library in waypoints will not save a flight. I have not tried on my Galaxy S7 yet to see if the bug is with CS or the app. I plan on testing again later today and will post my results here

I don't have the option of selecting Precision Landing either on my Android or iOS device.  I did test it out though about an hour ago and it landed on my pad about 6 inches from where it took off   I just flew it out about 300 feet at 400' alt and did a manual RTH.

hallmark007 Posted at 11-22 07:46
(requires DJI GO 4 v4.3.4 or later)

So I imagine it may have to wait for app update.

There was a 4.3.4 update pushed out on the 16th, but I've heard some saying that it will automatically perform when you land the aircraft during a manual RTH

I am getting a ‘Failed to Update’ - tried several times, but still getting the same failed to update.  I sent a report .

I am running v4.3.4 (4244) on iOS

Any thoughts.

When will we see home and course lock return? I loved those 2 features? Also what about the promised Waypoints feature? (Page 30 of manual-not Hyperlapse waypoints)

cammot53 Posted at 11-22 08:45
I am getting a ‘Failed to Update’ - tried several times, but still getting the same failed to update.  I sent a report .

I am running v4.3.4 (4244) on iOS

I’ve just done mine through the app 20minutes. I have good service so I’m sure that helps.

I've upgraded the drone, the remote control and the 3 batteries with the PC and DJI Assistant .... tomorrow we'll see how it behaves

Looks like some good updates

cammot53 Posted at 11-22 08:45
I am getting a ‘Failed to Update’ - tried several times, but still getting the same failed to update.  I sent a report .

I am running v4.3.4 (4244) on iOS

The DJI servers are extremely busy during these world wide updates.  I got the same messages several times when using the App and RC.  I switched to using the DJI Assistant and got the A/C updated perfectly.  Every thing is working as advertised.  Good job DJI!

Thanks for sharing

unfortunaly no waypoints 2... coming soon?

Balaes Posted at 11-22 09:28
I've upgraded the drone, the remote control and the 3 batteries with the PC and DJI Assistant .... tomorrow we'll see how it behaves

Really, we have to upgrade battery firmware too?

DanielVieira Posted at 11-22 02:10
What is "Added Task Library to Hyperlapse Waypoint (requires DJI GO 4 v4.3.4 or later)."?

Task Library is saving the flight path that you used during the waypoints so that you could be able to use hyperlapse on the other day

So far so good. Tested precision landing. Although no setting in the app , it landed spot on. Drone automatic adjusts landing spot approx 8 meters high. Also no high wind messages anymore.
Although i put setting of  area c flying zone on ignore , i receive message in yellow saying geo : entering zone c ( or something like this) probably a small bug

dronybaloney Posted at 11-22 10:54
So far so good. Tested precision landing. Although no setting in the app , it landed spot on. Drone automatic adjusts landing spot approx 8 meters high. Also no high wind messages anymore.
Although i put setting of  area c flying zone on ignore , i receive message in yellow saying geo : entering zone c ( or something like this) probably a small bug

Well if it’s auto that’s good no one will forget it.

dronybaloney Posted at 11-22 10:54
So far so good. Tested precision landing. Although no setting in the app , it landed spot on. Drone automatic adjusts landing spot approx 8 meters high. Also no high wind messages anymore.
Although i put setting of  area c flying zone on ignore , i receive message in yellow saying geo : entering zone c ( or something like this) probably a small bug

That's good to know - thanks for sharing your feedback.

well well...thanks DJI for listening to my whining about shutter speed!  look forward to testing.

All firmware upgrades (aircraft, RC and batteries) went very well using DJI Assistant 2.

kykphantom Posted at 11-22 11:32
All firmware upgrades (aircraft, RC and batteries) went very well using DJI Assistant 2.

What does the battery upgrade bring?

Fre Mo Posted at 11-22 10:17
Really, we have to upgrade battery firmware too?

if you put a new battery, the sistem will say : "incisistent firmware found"

Balaes Posted at 11-22 20:00
if you put a new battery, the sistem will say : "incisistent firmware found"

Don't you just put new battery in Mavic 2 and do a "refresh" for the upgrade in Assistant 2??? Thanks

Sweet I will be upgrading by this weekend.

DJI Gamora Posted at 11-22 03:43
Hi, we do appreciate sharing this latest firmware to our co-pilots. Fly safely.

I’ve noticed that there hasn’t been update for the M2 and Goggle RE situation. Can you please give us an indication of when they will be functioning correctly together. Thanks

Balaes Posted at 11-22 20:00
if you put a new battery, the sistem will say : "incisistent firmware found"

It would be nice if the DJI windows' app let you know that the battery(ies) needed upgrading.  I obviously had one in the drone and upgrade the drone with no info on battery upgrade.  Then I upgraded the controller.  

Later wondering about my other two batteries, I fired up the controller, my tablet and placed another battery in - it upgraded and I did the same for the 3rd battery.  I would have done them all when it was hooked to the computer but it did not ask about batteries at all.

ff22 Posted at 11-22 21:09
It would be nice if the DJI windows' app let you know that the battery(ies) needed upgrading.  I obviously had one in the drone and upgrade the drone with no info on battery upgrade.  Then I upgraded the controller.  

Later wondering about my other two batteries, I fired up the controller, my tablet and placed another battery in - it upgraded and I did the same for the 3rd battery.  I would have done them all when it was hooked to the computer but it did not ask about batteries at all.

Your right,but bigger problem with no notes for batteries, is when people go out to fly change batteries only to realize that battery needs FW update, simply because of one line in notes could have avoided this happening.

jctarvin Posted at 11-22 20:20
Don't you just put new battery in Mavic 2 and do a "refresh" for the upgrade in Assistant 2??? Thanks

yes, i did

El Diablo Posted at 11-22 23:23
You are kind of obsessed with the Moire thing... Moire only happens when shooting repetitive patterns that surpass the resolution of the sensor and at specific angles. if you are going to keep shooting brick houses midday, perhaps you should consider a different drone. You can partially reduce Moire in post but not elimimnate it completely. As I said before, VERY expensive DSLR cameras with lenses that cost more than the M2P have Moire.

FYI, the side sensors aren't the same as the front or rear sensors, from my understanding they cannot operate at higher speeds than the auto modes. Therefore, I don't believe this could be fixed through fw but perhaps in an M3P.

About the sensors, they can and they work....just go to Active Track and use them without track anything

Hello, i have a problem with task library. When I try to save my task I have massage " task save failed". What can I do?

djiuser_vHRkOb9BystP Posted at 11-23 06:52
Hello, i have a problem with task library. When I try to save my task I have massage " task save failed". What can I do?

same problem here