GS Pro seems to work great with Spark!  Except for 2 issues.  When speed is set to Auto it slows down and goes faster for each leg of a waypoint mission.  When speed is set to Manual it just hovers and does not start the mission when you click on the Start icon.  It takes off and hovers.  The only problem is the speed.  It flies the mission correctly.  And there is no video on the screen.  Anyone else try GS Pro with Spark?  Any ideas how to make it go with Manual Speed?  What does Auto mean?
Thanks in advance,
Steve

DJI GS Pro is compatible with the following DJI aerial platforms and flight controllers:

Mavic 2 Pro, Mavic 2 Zoom,
Mavic Pro,
Phantom 3 Standard/4K/Advanced/Professional,
Phantom 4/Pro/Advanced/V2,
Inspire 1/Inspire 2,
Matrice 100,Matrice 200/210/210 RTK,
Matrice 600/600 Pro,
A3, N3

That might be your problem with 'no video' and the speed behaviour.

Hi Steve, thank you for bringing this query to us. Apologies but the DJI GS Pro is not compatible with the DJI Spark . Kindly visit the FAQ section from the GS Pro product page for more information. Below is the list of compatible aircraft with the GS Pro. Should you have any concerns, don't hesitate to reach us. Thank you.

Great answers!  Except one thing.  It works just fine with Spark!  Because it's the same SDK as Mavic, with all the same SDK functions.  All you have to do is push the right stick and it will go to the first starting point at whatever speed you choose.  Problem solved.  Just a few tweaks would be nice like Autopilot and Litchi have done for Spark.  Please?

The Auto and Man speed functions work exactly like they were designed FOR SPARK.  Is there a user manual for GS Pro app, so we can read about these functions and others?

https://dl.djicdn.com/downloads/ ... _v2.0_EN_201811.pdf

Read the manual.  "Auto" (WP mission) is supposed to be a "constant speed".  It is not with Spark or Phantom 3 either.

Manual - GSPro 2

Instead of Landing as selected in GS Pro upon mission completion.  It RTH Returned to Home as set in the DJI GO 4 app.  It does this with Phantom 4.  Please help.

Question for DJI

Why can't you adjust the maximum speed during a 3d mapping mission in GS Pro, unless you select stop and take image? I surveyed an area today with an M600 and a IXM-100, 14.9ms speed is ridiculous!!
Surely this can be updated in the app to allow a more sensible safer speed to be selected. It would also allow reduction in motion blur.

R

No answer, does DJI read these posts?