Please select Into the mobile phone version | Continue to access the computer ver.
Motionlapse jerky movements
624 8 2018-12-15
Uploading and Loding Picture ...(0/1)
o(^-^)o
yvanvanhoorickx
lvl.2
Flight distance : 24659 ft
  • >>>
Belgium
Offline

Hi,

This week I bought the Ronin S. This is my 1st motorised stabilizer and overall, I'm very happy with it.
But one of the reasons I bought this gimball was for it's Motionlapse functionality. This morning I did a 1st test with my Nikon D850.
Gimball was perfectly stabilised but the movement was not smooth at all. (See video). What could be the reason?


2018-12-15
Use props
DJI Natalia
Administrator

Offline

Hi there, we're sorry for the inconvenience caused. Can you please show us a screenshot of the Motor Parameter settings on the app? Also, may I know what lens are you using? Thank you.
2018-12-15
Use props
yvanvanhoorickx
lvl.2
Flight distance : 24659 ft
  • >>>
Belgium
Offline

Hi, I'm using an Irix 15mm lens.
And these are the motor settings...
2018-12-15
Use props
raphael_bellizzi
lvl.4
Flight distance : 532654 ft
Canada
Offline

Your parameters looks way far from good. Many parameters bigger than 5. Check the balance before run the auto tune.
2018-12-15
Use props
yvanvanhoorickx
lvl.2
Flight distance : 24659 ft
  • >>>
Belgium
Offline

raphael_bellizzi Posted at 12-15 23:34
Your parameters looks way far from good. Many parameters bigger than 5. Check the balance before run the auto tune.

Hi Raphael, thank you for your reply. To be honest, the parameters aren’t saying me much for the moment.
But now I did a new calibration with excellent results on all 3 axes and here are the results after auto tuning.
What is the parameter I have to take care off?
Grts,
Yvan.
6A33CC9F-7D5D-46F9-8C2C-B9FE8123A929.png
2018-12-15
Use props
raphael_bellizzi
lvl.4
Flight distance : 532654 ft
Canada
Offline

yvanvanhoorickx Posted at 12-15 23:49
Hi Raphael, thank you for your reply. To be honest, the parameters aren’t saying me much for the moment.
But now I did a new calibration with excellent results on all 3 axes and here are the results after auto tuning.
What is the parameter I have to take care off?

Hey, now it looks so much better. Probably your problem would be solved. Did you tried with this new parameters?
2018-12-16
Use props
yvanvanhoorickx
lvl.2
Flight distance : 24659 ft
  • >>>
Belgium
Offline

Not yet due to bad weather, will do a new test later this week. I will keep you informed.
2018-12-16
Use props
ecartertex
lvl.1
Flight distance : 257582 ft
  • >>>
United States
Offline

I have noticed the same issue.  I just got the ronin and have shot about 4 motionlapse and all have jitter to some degree.  I usually balance it, balance test, then auto tune before shooting.  I am using a Sony A7iii with the Tamron 28-75 DI iii.  I thought it was the IR skipping shots so I bought the new Sony cable.  Shots seemed more reliable but still has a slight jitter.  I am also running the 1.7 firmware on the Ronin.
2019-1-15
Use props
ecartertex
lvl.1
Flight distance : 257582 ft
  • >>>
United States
Offline

2019-1-16
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules