My setup is the Inspire 2, X5S camera, cendence remote and 7.85 ultra bright Crystal Sky monitor.
When I am flying in Tapfly mode I can not minimize the FPV screen to operate the camera with the sticks. When I touch the minimize field it says drone can not fly there (screenshot). So it looks like it is not activated. Like this it is impossible to operate the camera in a proper way.

I did not have this issue before I updated to the latest firmware 01.02.0300. Remote controller firmware is 02.00.0150. App version 4.3.4

When I am using my dual operator remote with an iPad mini the issue does not exist and `almost`everything is fine. But I want and need to use my cendence remote with the crystal sky monitor.

Any suggestions or tipps?

Thanks a lot!

DJI!!!
Don't you have any suggestions! Looks like customer support is not a big interest of you?!?!?!
Super disappointing!!!

have you tried to assign a hardware button to minimise the fpv cam? This way you dont have to touch the screen.

Hey JBSonic,

thanks for your input but the possibilities to assign a button on the Cendence remote are very limited and it is not possible to do so.

Thanks and all the best!

I have the same problem with the normal RC.

fans38fec358 Posted at 1-18 07:16
I have the same problem with the normal RC.

Hi fans38fec358,

which monitor do you use? On the normal RC with an iPad mini4 and the latest OsX it works.
But it is a pain in the ass to switch always between normal RC or Cendence...

DJI!!!
Do you have any suggestions????????
Please help!!!!

I have the same issue but not a fix for it, is there one?
My setup is the Inspire 2, X5S camera, I2 remote and 7.85 ultra bright Crystal Sky monitor.
When I am flying in Tapfly mode I can not minimize the FPV screen to operate the camera with the sticks. When I touch the minimize field it says drone can not fly there (screenshot). So it looks like it is not activated. Like this it is impossible to operate the camera in a proper way.

my latest firmware 01.02.0300. Remote controller firmware is 01.01.0060 App version 4.3.16

Any suggestions or tipps?

Hi have the same problem. Did any work out away around this when using the Crystal Sky??

Same problem here.

Um .. same problem here.

well looks like DJI doesn't give a f...
I never got any proper help.
I hope the Inspire 3 setup and firmware won't be as buggy as the Inspire2 one...

I have my C2 mapped to the FPV camera maximize/minimize on the normal controller which solves this issue. Sorry to hear this is not possible on the more expensive Cendence! Crystal Sky vs ordinary smartphone/tablet should not matter in this case, right? Or am I missing something?

Hey Jai Jai,
I never tried the Cendence remote with an iPad as I really don't like the iPad mount on the remotes. The iPad mount doesn't handle rough weather conditions very well and I broke already two although I am very careful. And with the iPad you need a sunhood which makes changing the settings a pain in the a...
Well after 3 years without a single reply from DJI I don't think there will be a solution. It's super disappointing that DJI's support on the professional line is miles away from a professional support!!!