Ray-CubeAce
Captain
United Kingdom
Offline
|
WebParrot Posted at 1-6 21:26
It happened twice (out of maybe 50 off/on cycles), but after turning it on/off again, it engaged. However, I'm experiencing the slight droop-and-twist about 5 seconds after it DOES go to storing. It's like the instruction to 'go to storage' uses some powered function, then when the final "off" occurs, the position hold also disengages. If I'm quick with sliding it into the case... no problem. But too slow and I still have to re-direct (about 15 degrees off center). Finally, just in case, make sure you've updated the firmware. The first update supposedly incorporated the park function.
This is what my initial post was about a week or so ago but the admin here came back saying it was normal behavior and nothing to worry about. More of a concern now is the carry strap. The string sits on the inside just above the gimbal. When putting the Pocket back into its case sometimes the gimbal catches. Considering the warnings that the gimbal motors are precision instruments, there should be no obstructions of any type for the gimbal to catch on. |
|