Hi,

Wondering if it is possible in GS Pro to have two separate 3D Maps areas to be flown for one flight to save on landing and taking off time.

Is this possible?

1st mission: set your end mission action to 'Hover'
While the AC is hovering, select and start your 2nd mission, done.

DJI GS PRO, otherwise called the Ground Station Pro, is an iPad application intended to control and plan programmed flights for a DJI airship. The GS Pro has an unmistakable and compact interface enabling complex missions to be arranged in only a couple of taps.

Keule Posted at 1-14 08:20
1st mission: set your end mission action to 'Hover'
While the AC is hovering, select and start your 2nd mission, done.

Thanks,  Will give that an try and will the return to home function still be set to return the UAV to first take off point if you know?

Keule Posted at 1-14 08:20
1st mission: set your end mission action to 'Hover'
While the AC is hovering, select and start your 2nd mission, done.

Thanks,  Will give that an try and will the return to home function still be set to return the UAV to first take off point if you know?

Aaron,WA Posted at 1-15 15:02
Thanks,  Will give that an try and will the return to home function still be set to return the UAV to first take off point if you know?

Failsafe RTH is depending on your aircraft settings in GSPro.
- If 'Exit Mission When Signal Lost' is OFF (default) then the mission will continue even if the RC has lost communication with the AC.
- If 'Exit Mission When Signal Lost' is ON then your End of Mission action will take place (Land, Hover or RTH)

SmartBattery RTH (low battery reaches your preset threshold in GO4 app) will always pause your mission and trigger RTH