Please select Into the mobile phone version | Continue to access the computer ver.
Lightbridge set up on Phantom 2 with New 2.4 Controller : PROBLEM
856 1 2014-11-8
Uploading and Loding Picture ...(0/1)
o(^-^)o
adrian
lvl.1

Canada
Offline

Has anyone successfully binded the new dji 2.4 controller with lightbridge on a phantom 2 with gopro ? If so can you please let me know your work flow.

My lightbridge works, I am getting image & IOS on my screen, BUT it says Controller = 0  . I have binded the controller with another phantom 2 so I know the controller works. I have upgraded the Controller, The phantom 2, Lightbridge ground & transmitter.
This is the odd part

> I push in the red LED to bind until it blinks > Turn on the controller
> the red blinking light will turn SOLID GREEN ( which means it has successfully binded )  
>  BUT the yellow lights keep flashing instead of doing rapid green

* when i plug into P2 assistant it does not recognize any information from the 2.4 controller.




2014-11-8
Use props
adrian
lvl.1

Canada
Offline

^ This problem was solved by putting the red end to the lightbridge of the trainer cord and the black end to the controller ( opposite of what you would usually do )
2014-11-8
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules