Please select Into the mobile phone version | Continue to access the computer ver.
wobbly holder
2207 12 2015-6-5
Uploading and Loding Picture ...(0/1)
o(^-^)o
lukx
lvl.2

Poland
Offline

Is it me or phone/tab holder is a bit wobbly and top screw is getting loose very easly which casing more wooble ?
2015-6-5
Use props
sploodge
Captain
Flight distance : 809350 ft
  • >>>
United Kingdom
Offline

This is a common issue. Some people buy andInspire 1 device holder - http://goo.gl/q8IBce - Another option is to remove the holder from the controller and putting a single wrap os sellotape ( scotch tape ) around the shaft ( a piece that just wraps one arund is all thats needed ). Works a treat. There is also a little alle key screw near where the shaft connects to the plastic holder that sometimes needs tightening.


deviceholderwobblw.jpg

Remember to buy extra propellers and one or two spare batteries to keep you flying
www.Phantom-Guide.co.uk - The Ultimate Phantom 3 Resource

2015-6-5
Use props
Daninho
Second Officer
Flight distance : 70203 ft
Germany
Offline

its a nice tip
2015-6-5
Use props
lukx
lvl.2

Poland
Offline

big thanks sploodge !
2015-6-5
Use props
jacmac64
lvl.4

United States
Offline

I tightened mine with needle nose pliers and haven't had any problems since. Just be careful not to over tighten.
2015-6-5
Use props
PhantomHelp.com
Captain
Flight distance : 183694 ft
  • >>>
United States
Offline

Here's a detailed comparison between the Phantom 3 and Inspire 1 tablet mount:
http://www.phantompilots.com/thr ... -tablet-mount.42864





www.PhantomHelp.com
Find the latest must-haves, fixes, mods, how-tos, guides, and accessories for your Phantom.
Phantoms in stock and ready to ship worldwide! (see availability)
2015-6-5
Use props
salota8550 This user has been deleted
Tip: the author has been banned or deleted automatically shield
2015-6-5
Use props
lukx
lvl.2

Poland
Offline

new samsung tab s2 is coming and it's supposed to be very thisn and light
2015-6-6
Use props
RedHotPoker
Captain
Flight distance : 165105 ft
Canada
Offline

Went ahead and ordered the Inspire 1 device holder.
It should help elevate and eleviate any iPad Air 2 64gb Cellular, wibble-wobble...

RedHotPoker
2015-6-6
Use props
gregg1r
First Officer

United States
Offline

RedHotPoker Posted at 2015-6-7 00:34
Went ahead and ordered the Inspire 1 device holder.
It should help elevate any iPad mini wobble...

Just be cautioned that by making the mount firmer, you moved the point of failure from the bracket to the transmitter body.
Make sure that the barrel adjuster is tight before use. If you have an issue with the barrel loosening up excessively, take some clear nail polish and coat the thread and screw it back together. Thread lockers like Loctite  are too strong for small fasteners and will com[licate things if you ever need to get the bracket off.
2015-6-6
Use props
RedHotPoker
Captain
Flight distance : 165105 ft
Canada
Offline

There are numerous grades of thread-loctite products. Anyway, a hair blower, heating up the adhesive, loosens it right up.
I use it in all of my helicopter screws that need it,,, so know plenty about it. Not using nail polish or that kind of thing in RC.

Thanks for the tips, will be keeping my good eye on all screws and fasteners.

RedHotPoker

Align TREX 700E DFC HV~Spectrum DX8
DJI Phantom 3 Professional, Parrot AR Drone 2.0,
Blade mCPX BL, Blade mQX, Heli Max 1SQ~Spectrum DX6i, Traxxas QR-1, RealFlight 6.5

I have updated my SIG
Align TRex 700E DFC HV~Spektrum DX8 MAAC 91236
Blade mCPX BL Blade mQX DJI Phantom 3 Pro'~iPad Air 2 Cellular
Heli-Max Voltage 500 3D Heli-Max 1SQ~AnyLink~Spektrum DX6i
Parrot AR Drone 2.0 Traxxas QR-1 RealFlight 6.5

2015-6-7
Use props
Barney Rubbel
Captain
Offline

RedHotPoker Posted at 2015-6-8 00:47
There are numerous grades of thread lock-lock tite products. Anyway, a hair blower, heating up the a ...

I know this is an old thread, but I just got my Inspire Tablet Mount for my P3P and it didn't come with the short screw needed to fasten the end down. It is not the same size as the original screw, did you get one with yours? Thanks!
Argghhhh.  Never mind, I found it stashed away in some cardboard cut out thing. Sorry for bumping this up.

Barney
2016-3-1
Use props
RedHotPoker
Captain
Flight distance : 165105 ft
Canada
Offline

@Barney Rubbel,
Swell & good. Did you get the flat head driver in with yours too? ;-)
Very handy when you have to tighten down that awesome device holder again.
Yeah, it will loosen up some. In about 6 months. Hahaha
Ok carry on smiling, everybody.

Wheeee hahaha

RedHotPoker
Wish we had a forum SIG allowance...
Align TRex 700E DFC HV~Spektrum DX8 MAAC 91236
Blade mCPX BL Blade mQX DJI Phantom 3 Pro'~iPad Air 2 Cellular
Heli-Max Voltage 500 3D Heli-Max 1SQ~AnyLink~Spektrum DX6i
Parrot AR Drone 2.0 Traxxas QR-1 RealFlight 6.5

2016-3-1
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules