Hi There,
Can someone out there please let me know where can I order DJI training Cable to use on my New Remote? I got Phantom 2 Vision+ with the New Remote that has training port but, DJI dose not ship with that Cable.

Thanks in Advance.
Song

Try this one:

http://www.ebay.de/itm/1-5m-Klin ... hash=item5d30eeb2da
You can use a simple stereo audio cable.

knarfboy Posted at 2014-11-9 17:57
Try this one:

http://www.ebay.de/itm/1-5m-Klin ... hash=item5d30eeb2da

Thanks knarfboy

Just had a look on that link, I think that the wrong one it should one end like Audio Jack and the other end is USB so I can connect to Computer for Flight Simulation

what software do we use for the flight simulation?

splat973702003@ Posted at 2014-11-11 08:42
what software do we use for the flight simulation?

I used HELI-X5

sales@ozgames.c Posted at 2014-11-10 16:51
Just had a look on that link, I think that the wrong one it should one end like Audio Jack and the o ...

Right, if you like connect to computer, you need the USB cable.But if you like to connect two remotes thgether you need the cable with 2 audio jack.


Me you need to cross TX and RX like:


TX   --------------------  RX
RX   --------------------  TX
GND -------------------- GND


DJI shold give more informations.

Do does Heli-x5 have all the features like our copters have?  All the NAZA mode stuff, and that kind of stuff?  Or is it mainly up down left right to learn the main controls?

splat973702003@ Posted at 2014-11-12 02:05
Do does Heli-x5 have all the features like our copters have?  All the NAZA mode stuff, and that kind ...

I have no idea, I can't find the Cable to test it so I can't answer that question for now

Dear Song,

for the training cable, pls write an email to support@dji.com.

DJI-Jolie Posted at 2014-11-13 18:02
Dear Song,

for the training cable, pls write an email to .

DJI-Jolie will the training cable be made available to order online? Additionally I have seen posts on a group I am a member of that the new transmitter with the dial is being advertised that it includes a USB cable. I did not receive one. If I indeed should have received one how do I go about getting it? The group I mentioned is a Facebook group that consists of over 5,000 members. For those of you who see this post and would like to join the group here is the link to do so: https://www.facebook.com/groups/Vision.Plus.Owners/photos/

DJI-Jolie Posted at 2014-11-13 18:02
Dear Song,

for the training cable, pls write an email to .

I just received this answer from Jolie (representing support@dji.com) for my question at the bottom:
>  you can simply use the cable from your heli-x simulator.

The problem is that I don't have a cable for heli-x simulator. I downloaded the simulator over the internet.

I can see that the trainer port connects to a 3.5mm stereo plug. What I want to know is how it is connected to the computer. Does it produce analog signals that can be connected to mic input ? or does it produce digital signals that should be connected to usb port ?

My original question was:
>>I just purchased a phantom 2 with the new transmitter that
>>has a training port.
>>
>>Training port was the main reason for me to select this
>>version. But unfortunately there is no cable for this port
>>in the package. At first inspection, I could not figure
>>out how to use it.
>>
>>I would appreciate if you could kindly give me some info
>>(pinouts etc.) so that I can produce a cable to be used
>>with heli-x simulator.

sevgum, from what I've found out, it's the mini-jack to USB cable, and is less than 10 dollars USD.  The sim program suggested by others, Phoenix 5, is over 100 USD, so I won't be getting it.  When a sim program that is just for these quads becomes available at a much lower price, I would buy it.

I think, You'll find all answers here: http://www.hobbyking.com/hobbyking/forum/forum_posts.asp?TID=1428

knarfboy Posted at 2014-11-9 17:57
Try this one:

http://www.ebay.de/itm/1-5m-Klin ... hash=item5d30eeb2da

knarfboy gives you the cheapest cable : connect it to the microphone input of your computer, the other end to your Rc controller.

Yes, the analog sound will be converted to numeric signals ...

Just download, install  and run
http://smartpropoplus.sourceforge.net/site/index.php/download
Then, just check everything is OK :


Adjust the micro volume :

follow my settings :


Download and install helix 6 (the demo version is really great)

At this point, you cannot fly : you have to calibrate your controller :
go here

Click on the first left button (manettes in french) and follow the calibration procedure
It works great at home, I had this cable, so I spent 0€ for it !

rdsb Posted at 2015-2-27 01:11
knarfboy gives you the cheapest cable : connect it to the microphone input of your computer, the ot ...

Works for meThanks for this post, it was most helpful.