Hogtopia
lvl.1
Flight distance : 2723 ft
United States
Offline
|
I have a new to me Inspire 2 that I purchased from the original owner. One of the first things I did was to make sure the memory cards were empty and so I dumped their content to my local computer and then emptied the contents. This included a SanDisk Ultra PLUS 64GBV10 XC1 (which I was told came with the unit) and CINESSD. When putting the SD Card back in, I keep getting an Error that says, The SD card has an error, please replace it." The card works in my GoPro Hero 7 and can be read by my MacBook Pro 15".
I have tried the following:
1. Delete all the files and place it back in the Inspire. Result: SD Card Error ... please replace
2. Format the card on the Mac using ExFAT format and place it back in the Inspire. Results: SD Card Error ... please replace.
3. After 2, Reset the camera settings and then try formatting. Two different results: 1. SD Card Error Please replace, and an exclamation status and where I'm allowed to start a format that never ends.
4. The I tried using a SanDisk Extreme 128GB U3 128GB which I believe is compatible. Works fine in my computer and a Go Pro Hero 5 and 7. Results: simplar to the 65GB card where I alternate between SD Error ... please replace and some attempts at formatting that never end.
Thoughts on next steps or am I missing something simple.
Thanks in advance for any assistance.
|
|