Is anyone using a Lanyard with their Mavic controller that they are happy with?

I look at the usual ones such as this

https://www.heliguy.com/pgytech-remote-controller-clasp-for-mavic-2-p5285/s5738?utm_source=google&utm_medium=cpc&utm_term=pgytech-remote-controller-clasp-for-mavic-2-pgytech-remote-controller-clasp-for-mavic-2&utm_campaign=product%2Blisting%2Bads&gclid=Cj0KCQiAheXiBRD-ARIsAODSpWM26fwnUn8NPE4SmneelcqCtwqR5iQeHtpxLnMCmTpGMoETEFUVJLkaAn39EALw_wcB

... and think the strap will obscure the phone unless held at full length all the time?

I'd rather have something that is either side of the screen but haven't found anything.

I use a Note 8. A fairly large phone so these

https://www.google.com/amp/s/www.pinterest.ie/pin/781585710309654282

are unfortunately no good either.

May make one myself ...

I ordered one of these for my Mavic 2;

https://www.amazon.co.uk/gp/product/B07MVVVXD3/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1

Not sure if yours is the original controller or if it has the threaded holes of the Smart Controller...

Hi GlynH

Thanks for the suggestion.

I should have mentioned for the standard controller.

Hello and good day *DM*. Thank you for choosing DJI and for the inqury. I hope you'll get the best recommendation here from our valued DJI Members and Customers with there experiences on what lanyard they are using on the DJI Smart Controller. Thank you for your support.

I have two.  A small one that came with my Fly More bundle, and a larger one, that came with my Mavmount. I rarely use the former, since RC + phone is usually easy to hold, but it can be useful in certain dynamic situations. The larger one I use all the time whenever I'm hooking my iPad Pro 12,9", as the idea of dropping a large expensive tablet is not something I'm going to entertain.

Im very happy with this one, cheap and effective, not to mention that it doesnt take up any space or need to be removed.

https://www.pgy-tech.com/remote-controller-clasp-for-mavic-2

CineView Media Posted at 2-6 06:45
Im very happy with this one, cheap and effective, not to mention that it doesnt take up any space or need to be removed.

https://www.pgy-tech.com/remote-controller-clasp-for-mavic-2

Hi CineView Media
Thanks for your reply.

The thing that prevented me from buying one of those is the positioning of the Lanyard which hangs over the screen if not at full stretch.

Maybe I'm wanting something that doesn't exist ... .

I guess what I am after would be something like this

https://goo.gl/images/MK7eTi

... but instead of the single eye something that extends out either side with an eye at each end.

Me and my ideas ...
I think I may just try yours ...

*DM* Posted at 2-6 10:03
Hi CineView Media
Thanks for your reply.

Hi DM this is the one I use https://www.amazon.co.uk/Control ... ylife/dp/B07B4F7V32

zappy54 Posted at 2-7 03:40
Hi DM this is the one I use https://www.amazon.co.uk/Controller-Bracket-Y56-Outdoor-Sunnylife/dp/B07B4F7V32

Hi Zappy54

Thanks for thebsuggestion.

I did see that one and it probably is the closest to what I had in mind.

I could add a plasic bit to extend it either side.

I have now ordered the one previously suggested but may get yours if I find it lacking.

yes just reread op bigger phone than my iPhone 8 unless like you said extend the loops I just ordered this.   https://www.ebay.co.uk/i/253759696102?chn=ps   because of neck strap and its got the two loops

*DM* Posted at 2-6 10:03
Hi CineView Media
Thanks for your reply.

Never had any problems with that.
However, what no drone/accessory vendor have yet to understand, is to have a balanced controller.
Those of you that comes from RC knows what im talking about, and for ordinary radios such as Futaba, Spektrum, Graupner etc, you can even buy balancers so that the radio will keep level when you let go of it.
Maybe in 10 to 20 years someone will eventually "discover"  it and put it up on Kickstarter and make millions out of it

Ive been using Secraft for many years.
If as many as possible send them an email asking for a tray for the Mavic controller, im sure they will make one.

http://www.secraft.net/shop/step ... ode=C20110111064239

CineView Media Posted at 2-7 05:06
Ive been using Secraft for many years.
If as many as possible send them an email asking for a tray for the Mavic controller, im sure they will make one.

Thanks  CineView I've sent a request Email to Secraft for a good balanced tray for Mavic 2