Hi,
I have a problem with the set GH5S + Ronin S + Ninja V.
Once the set is wired  GH5s and Ninja V with HDMI cable, GH5s and Ronin S with DJI cable
the GH5S LCD turns off ....
I only have my Ninja V to shoot. If I ask the GH5S to display the information in the transfer HDMI, I have my settings data on the Ninja (speed, opening, iso, ...) but I record this information on my rushes !!!
And if I do not transfer the information of the GH5s everything is fine with the recording but I do not see any setting info anywhere.
I can actually unplug the GH5s from the Ronin S, I get both screens but I loose the follow focus and the record button.
In other words, you can not operate easily with this set.
Do you know this issue and I.S. it possible to solve it.
Thanks for your help.

Hi yvespinot 5, we are so sorry for the troubles with the external monitor connected, this is caused by the rules from Panasonic instead of Ronin-S, there is nothing more we can do at the moment, sorry again for the inconvenience caused.

https://store.dji.com/product/ro ... cable-for-panasonic

I have the same setup as you. I had to use the Ronin-MX/S RSS Control Cable and the Follow focus motor to get mine working the way it should. Its a extrea $170 but with just the mx/s RSS wire you lose the follow focus function. This way you don't loose the screen on your GH5.

you can also push to focus with the mx/s rss cable

fansa605563a Posted at 2-19 20:31
[view_image]

Very professionel setup. Thank You very much for your answer. I did’n know the RSS cable possibility.

Ronin-MX RSS Control Cable for Panasonic seems to not work on the setup gh5 + roninS + ninjaV . I tried it and the message on the gh5 was This operation is disabled in the curent hdmi rec output bit mode 4:2:2 10 bit. Do you know this issue and is it possible to solve it?
Thanks